When you find out about unusual noises on your Audi Rs5 you have a tendency to be anxious. Specifically when you feel a noise coming from the release bearing of your Audi Rs5. It is immediately assimilated to an engine issue and can therefore be serious. As we know that you do not take these trouble lightly, we have decided to create this article content to help you find the triggers and free yourself from this issues as quickly as possible. To do this, we will first focus on the function and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Audi Rs5 and their origins.
What is the task and operation of the release bearing on Audi Rs5?
Task of the release bearing on Audi Rs5
The release bearing of your Audi Rs5 has a crucial function in the operation of your entire gearbox system. Indeed, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Audi Rs5.
Action of release bearing Audi Rs5
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (according to its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two different kind of release bearing Audi Rs5 :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two kind of release bearing . This one, as opposed to the hydraulic style, is operated by a mechanical pulling system that will release the clutch disc. In this situation, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complicated, is the kind most used in contemporary automobiles. It is however more elaborate than the pulled release bearing. Indeed, it will be composed of a hydraulic tube that will receive the pressure directly from the clutch pedal.
More conventional clutch stop
Release bearing noises Audi Rs5 and their origins
I feel a release bearing noise on Audi Rs5 every time I drive and it stops when I depress my clutch pedal
If you feel a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ceases when you press your clutch pedal, this noise often sounds like a bell noise, it is highly possible that your release bearing is the reason. Make sure that this noise stops when you disengage, in which circumstance it is time to replace the release bearing of your Audi Rs5.
I feel a release bearing noise when my pedal is up and I feel jolts in my foot
If you feel too much or too little resistance when you press your clutch pedal, and it is linked with jolts that you can feel in your clutch pedal, then the stop/fork release/blades grouping is deteriorated. Indeed, this noise often comes from the broken fork that no longer allows the device to function normally.
I feel a grinding noise coming from the release bearing of my Audi Rs5 when I try to shift gears and they do not shift
This issues arises most often on models equipped with hydraulic release bearing. It is often linked to a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Audi Rs5, then you probably have a leak coming from your release bearing. It must therefore be swapped fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Audi Rs5 and it’s not from your release bearing, check this article to have more informations.
