Discovering a strange noise from your car does not tend to reassure, and although it could be harmless, it is also conceivable that it is a signal of a big breakdown on approach. Discerning a noise based on the rear end of your Nissan Pulsar may indicate a stopover at your garage sometime soon, like just a rock in the tread of a car tire. To help you check out the triggers, our team has written this content page which should help you to see more clearly. First, we will see what the different noises and concerns connected to your Nissan Pulsar rear end noise are, and second, what your solutions are if the problem is not included in this list.
Parts that can cause noise in the rear end of my Nissan Pulsar
Rear end loud noise Nissan Pulsar
If you recognize a loud noise on the rear end of your Nissan Pulsar, it may be related to your wheels. In fact, the wheels can be at the source of this vibration. Two possibilities are then possible, first of all, wheel balancing may be defective (loss of lead weight which fulfils this task), which triggers an imbalance in the wheel’s logical path and therefore its vibration. To check this, check out look at the presence of your balancing seals on your rims. Finally, it is also conceivable that a deformed or pre-used tyre may have the same types of symptoms and causes this rear end lound noise on your Nissan Pulsar. The deformation of a tyre, following an impact for example, will cause it to stick poorly to the ground and therefore noise will occur. In any case, take into account to examine the tread and sidewall of your tires. Another possibility is that your exhaust pipehas a hole in it or a collar has become loose. Please remember to go under your Nissan Pulsar while the engine is running and examine the sound of your exhaust pipe to identify possible exhaust gas leaks. If you find out of a loud noise but the trigger is not present here, we encourage that you read this article about loud noise on Nissan Pulsar, which might possibly give you more ideas.
Rear end noise slamming Nissan Pulsar originating from your suspension
If you discover a clicking noise on the rear axle of your Nissan Pulsar, it is conceivable that the suspension portion of your car may be affected. In fact, when the steering unit of your car is activated, the damping unit of your car may be the trigger of the problem. In fact, it is not extraordinary for the shock absorber cup to be out of order or for the shock absorber bearings to be out of order. Please remember to examine the condition of these two parts. For more details, read our article on suspension noise on Nissan Pulsar.
Squeaky noise rear end Nissan Pulsar caused by your bearings
A squeaking noise in the rear end of your Nissan Pulsar can also be a consequence of premature wear of your bearings. In fact, bearings have a major task in the proper handling of the car while driving. When you turn strongly, at high or low speed and bring the direction to a stop, the pressure applied on the bearings is higher than if you turn slowly, it can generate sounds close to a creaking sound if they are worn. Please remember to examine their condition. If you want more details about bearing noise on Nissan Pulsar, it’s here.
What if I still haven’t resolved the rear end noise of my Nissan Pulsar
If you still haven’t found an answer despite the different alternatives described here and the noise from the rear end of your Nissan Pulsar lasts, it is conceivable that the problem is related to other mechanical parts and that this failure is less common. Feel free to read this article on suspension noise on Nissan Pulsar which will eventually give you other ideas to help you solve your problem. Do not leave this problem lying around in any case and take your car to your technician to preserve your car and your safety.
