Listening a mystery noise from your vehicle does not tend to reassure, and although it might be harmless, it is also plausible that it is a signal of a serious failure on approach. Identifying a noise based on the rear end of your GMC Yukon may signal a stopover at your mechanic in the near future, like just a rock in the tread of a tire. To help you discover the causes, our team has written this article content which should help you to see more clearly. First, we will check out what the different noises and problems associated with your GMC Yukon rear end noise are, and second, what your solutions are if the trouble is not included in this list.
Parts that can induce noise in the rear end of my GMC Yukon
Rear end loud noise GMC Yukon
If you notice a loud noise on the rear end of your GMC Yukon, it may be relating to your wheels. In fact, the wheels can be at the source of this vibration. Two possibilities are then possible, first of all, wheel balancing may be faulty (loss of lead weight which fulfils this purpose), which leads to an imbalance in the wheel’s logical path and therefore its vibration. To check this, examine look at the presence of your balancing seals on your rims. Finally, it is also plausible that a deformed or pre-used tyre may have the same types of symptoms and triggers this rear end lound noise on your GMC Yukon. The deformation of a tyre, following an impact for example, will cause it to stick poorly to the ground and therefore noise will arise. Whatever the case, think of to check the tread and sidewall of your tires. Another possibility is that your exhaust pipehas a hole in it or a collar has become loose. Please remember to go under your GMC Yukon while the engine is running and check the sound of your exhaust pipe to identify possible exhaust gas leaks. If you find out of a loud noise but the trigger is not present here, we recommend that you browse this content about loud noise on GMC Yukon, which might possibly give you more ideas.
Rear end noise slamming GMC Yukon originating from your suspension
If you experience a clicking noise on the rear axle of your GMC Yukon, it is plausible that the suspension part of your vehicle may be affected. In fact, when the steering unit of your vehicle is activated, the damping unit of your vehicle may be the trigger of the trouble. In fact, it is not abnormal for the shock absorber cup to be out of order or for the shock absorber bearings to be out of order. Please remember to check the state of these two parts. For more information, read our article on suspension noise on GMC Yukon.
Squeaky noise rear end GMC Yukon coming from your bearings
A squeaking noise in the rear end of your GMC Yukon can also derive from premature wear of your bearings. In fact, bearings play a major purpose in the proper handling of the vehicle while driving. When you turn strongly, at high or low speed and bring the direction to a stop, the pressure applied on the bearings is higher than if you turn slowly, it can generate sounds close to a creaking sound if they are worn. Please remember to check their state. If you want more info about bearing noise on GMC Yukon, it’s here.
What if I still haven’t solved the rear end noise of my GMC Yukon
If you still haven’t found an answer despite the different possibilities described here and the noise from the rear end of your GMC Yukon lasts, it is plausible that the trouble is relating to other mechanical parts and that this failure is less common. Feel free to consult this article on suspension noise on GMC Yukon which will eventually give you other ideas to help you solve your trouble. Do not leave this trouble lying around in any case and take your car to your auto mechanic to preserve your vehicle and your safety.
