Discovering a mysterious noise from your car does not tend to reassure, and although it might be harmless, it is also conceivable that it is an indicator of a significant breakdown on approach. Noticing a noise originating from the rear end of your GMC Canyon may alert a trip to your garage in the near future, like just a rock in the tread of a tire. To help you locate the triggers, our team has produced this document which might help you to see more clearly. First, we will check out what the different noises and trouble connected to your GMC Canyon rear end noise are, and second, what your solutions are if the issue is not included in this list.
Elements that can trigger noise in the rear end of my GMC Canyon
Rear end loud noise GMC Canyon
If you establish a loud noise on the rear end of your GMC Canyon, it may be linked to your wheels. In fact, the wheels can be at the origin of this vibration. Two possibilities are then possible, firstly, wheel balancing may be faulty (loss of lead weight which fulfils this task), which contributes to an imbalance in the wheel’s logical path and therefore its vibration. To check this, look at look at the presence of your balancing seals on your rims. Finally, it is also conceivable that a deformed or pre-used tyre may have the same types of symptoms and causes this rear end lound noise on your GMC Canyon. The deformation of a tyre, following an impact for example, will cause it to stick poorly to the ground and therefore noise will emerge. In any case, please remember to verify the tread and sidewall of your tires. Another possibility is that your exhaust pipehas a hole in it or a collar has become loose. Bear in mind to go under your GMC Canyon while the engine is running and verify the sound of your exhaust pipe to find possible exhaust gas leaks. If you detect of a loud noise but the cause is not present here, we encourage that you read this article about loud noise on GMC Canyon, which may perhaps give you more ideas.
Rear end noise slamming GMC Canyon coming from your suspension
If you identify a clicking noise on the rear axle of your GMC Canyon, it is conceivable that the suspension portion of your car may be affected. In fact, when the steering unit of your car is activated, the damping unit of your car may be the cause of the issue. In fact, it is not exceptional for the shock absorber cup to be out of order or for the shock absorber bearings to be out of order. Bear in mind to verify the state of these two units. For more details, read our article on suspension noise on GMC Canyon.
Squeaky noise rear end GMC Canyon provided by your bearings
A squeaking noise in the rear end of your GMC Canyon can also result from precipitate wear of your bearings. In fact, bearings play an essential task in the proper handling of the car while driving. When you turn strongly, at high or low speed and bring the direction to a stop, the pressure applied on the bearings is higher than if you turn slowly, it can create sounds close to a creaking sound if they are worn. Bear in mind to verify their state. If you want more info about bearing noise on GMC Canyon, it’s here.
What if I still haven’t solved the rear end noise of my GMC Canyon
If you still haven’t found a remedy despite the different possibilities described here and the noise from the rear end of your GMC Canyon persists, it is conceivable that the issue is linked to other mechanical units and that this failure is less common. Feel free to consult this content on suspension noise on GMC Canyon which will eventually give you other ideas to help you solve your issue. Do not leave this issue lying around in any case and take your car to your auto mechanic to preserve your car and your safety.
