Hearing a strange noise from your car does not tend to reassure, and although it can be nothing major, it is also conceivable that it is a sign of an important breakdown on approach. Recognizing a noise based on the rear end of your Audi Q2 may indicate a stopover at your mechanic in the near future, like just a rock in the tread of a tire. To help you check out the triggers, our team has produced this article which might help you to see more clearly. First, we will check out what the different noises and trouble connected with your Audi Q2 rear end noise are, and second, what your solutions are if the issue is not included in this list.
Parts that can trigger noise in the rear end of my Audi Q2
Rear end loud noise Audi Q2
If you detect a loud noise on the rear end of your Audi Q2, it may be connected to your wheels. In fact, the wheels can be at the origin of this vibration. Two options are then possible, firstly, wheel balancing may be defective (loss of lead weight which fulfils this role), which contributes to an imbalance in the wheel’s logical path and therefore its vibration. To check this, take a look at look at the presence of your balancing seals on your rims. Finally, it is also conceivable that a deformed or pre-used tyre may have the same types of symptoms and triggers this rear end lound noise on your Audi Q2. The deformation of a tyre, following an impact for example, will cause it to stick poorly to the ground and therefore noise will emerge. In any case, please remember to verify the tread and sidewall of your tires. Another possibility is that your exhaust pipehas a hole in it or a collar has become loose. Please remember to go under your Audi Q2 while the engine is running and verify the sound of your exhaust pipe to discover possible exhaust gas leaks. If you note of a loud noise but the reason is not present here, we advise that you read this document about loud noise on Audi Q2, which may give you more ideas.
Rear end noise slamming Audi Q2 originating from your suspension
If you encounter a clicking noise on the rear axle of your Audi Q2, it is conceivable that the suspension portion of your car may be damaged. In fact, when the steering unit of your car is activated, the damping unit of your car may be the reason of the issue. In fact, it is not extraordinary for the shock absorber cup to be out of order or for the shock absorber bearings to be out of order. Please remember to verify the state of these two parts. For more information, see our article on suspension noise on Audi Q2.
Squeaky noise rear end Audi Q2 based on your bearings
A squeaking noise in the rear end of your Audi Q2 can also result of precipitate wear of your bearings. In fact, bearings have an important role in the proper handling of the car while driving. When you turn strongly, at high or low speed and bring the direction to a stop, the pressure applied on the bearings is higher than if you turn slowly, it can generate sounds close to a creaking sound if they are worn. Please remember to verify their state. If you want more details about bearing noise on Audi Q2, it’s here.
What if I still haven’t solved the rear end noise of my Audi Q2
If you still haven’t found a solution despite the different possibilities described here and the noise from the rear end of your Audi Q2 continues, it is conceivable that the issue is connected to other mechanical parts and that this failure is less common. Feel free to consult this content on suspension noise on Audi Q2 which will eventually give you other ideas to help you solve your issue. Do not leave this issue lying around in any case and take your car to your technician to preserve your car and your safety.
