On occasion your car can make noises in the front axle, you are very almost never reassured by this sort of noise and you automatically tend to presume that you will lose a wheel or that the fix will cost you an massive sum. Then, what if you detect a noise coming from the front end of your Peugeot 1007? It may not be much and you can repair the issue yourself, but if in doubt it is better to check before a larger troubles appears. It is with this in mind that we have chosen to compose this document and allow you to find out the issue and find a solution. We will, through several steps review all the elements that can produce noises at the front end of your Peugeot 1007. 
What are the elements that can cause front axle noise Peugeot 1007?
Most of our job will focus on finding the element that gives your Peugeot 1007 front wheel noise. The following is a list of the components that are most likely to be producing it and how to verify it.
Noise vibration front end Peugeot 1007 : the shock absorber cup
One of the most common reason of symptoms on your Peugeot 1007 front axle noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To check if this is the issue that concerns you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, consider replacing them as soon as possible as this may affect other parts and require more expensive repairs.
Noise while turning front end Peugeot 1007 : stabilizer bar
If you find out of a noise on your Peugeot 1007 at the level of the front end when you are turning flat or going up on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To verify the origin of the issue, you may feel a lack of balance in the direction of the car (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front axle noise when turning Peugeot 1007 : direction triangles
Finally, you may have a noise in the front wheel on your Peugeot 1007, when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also check the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your technician.
Loud noise front end Peugeot 1007 : bearings
One of the other possible origins of symptoms of the front axle of your Peugeot 1007, may be that one of your rollings is tired, it will tend to make a thumping noise that raises when it is under stress (turns faster and faster). So don’t forget to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them as soon as possible. If, on the other hand, this noise only happens with an engaged speed, refer to our article on loud noise on Peugeot 1007, you will certainly find a response to your issue.
Front end noise squeaking Peugeot 1007 : cardan shaft
One of the most traditional causes when noise happens on the front axle of your Peugeot 1007 when you turn with your car is connected to the direction of your car. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Peugeot 1007, do not hesitate to consult this article to find the solution to your problem.
