What could possibly be more frustrating than noises when you start your car… In fact, you probably previously discovered noises when you start your Chrysler 200 and generally speaking it’s frustrating. It might not be anything major, but each new engine starts usually turns into a scary moment during which you don’t know if your engine will start. That is why our team has decided to write this content page to support you find its origin. To do this, first, we will see the case of noise when starting on Chrysler 200 but the car does not start, and finally, the noise you can experience on your car if it starts, first cold and then hot.
I experience a noise when I try to start my Chrysler 200, but the engine doesn’t start
I identify a clicking noise at the start of my Chrysler 200
If you experience a noise when you want to start your car, and it does not want to turn on, it is most likely that it is the battery that is contributing to the issue. In fact, if you listen clicking noise when you start your Chrysler 200, and it sounds like a ticking, you probably lack the energy to run your starter, check your battery with a voltmeter and change it if necessary. In case that after checking out your battery, you still encounter a noise when starting your Chrysler 200 and it does not want to start, consult this article about starter motor noises on Chrysler 200 for more info and to find the source of your issue.
I listen a noise when I start my Chrysler 200 but the engine it starts
I experience a noise when I start my Chrysler 200
- Grinding or squealing type noises when I start cold Chrysler 200 :
If you experience a noise when you start your Chrysler 200, and this noise sounds like grinding or squealing noise, which can also be linked to vibrations, it is conceivable that it is the combustion of your car that is involved. In fact if you have an air/fuel mixture that is not good the normal running of the engine will be altered. Verify the state of your injectors and air intake system. For more info on the source of injection-related noises on Chrysler 200, read this article. - Cold start friction parts Chrysler 200 :
If you experience cold friction noises on Chrysler 200, it is almost sure that they come from one of your belts. Either the serpentine belt starts to wear out and therefore triggers a friction noise. It is also conceivable that the tensioner roller or damper pulley is worn out and that as a result the extension belt triggers a friction noise, often when cold. Visually examine your belt and change it if needed. If you have other friction noises, and it doesn’t result from your serpentine belt, we have a full article on engine of your Chrysler 200.
I experience a noise when starting my Chrysler 200 even when hot
- rubber mount / silent bloc dead motor
If you experience a clacking noise just as you start your car’s engine and it is more than 100,000 km long, it is conceivable that some of your engine silentblocks or rubber mounts are good to be swapped. And the huge vibrations produced by starting the engine can produce starting noise on Chrysler 200. Verify their state and swap them if needed. Browse this article if you would like to have detailed info on rubber mount noises on Chrysler 200. - Motor flywheel
Finally, if you notice a noise that sounds a little like a crank noise when you start your Chrysler 200, even when hot, it is conceivable that if your series is equipped with a dual-mass flywheel, it is the source of your concerns. In fact, these parts have created a lot of concerns on many cars. When they take part in the game they make noise when you start your Chrysler 200 and when you turn off the engine. Have his state checked by a professional.
