When you observe uncommon noises on your Ram ProMaster City you tend to worry about them. Especially when you feel a noise when you accelerate on your Ram ProMaster City. It is right away assimilated to an engine unit issue and can therefore be severe. As we know that you do not take these disorders lightly, we have chosen to compose this document to help you find the causes and eradicate this matter as quickly as possible. To do this, we will first see what are the causes of a high pitched noise when accelerating with my Ram ProMaster City, then what is a whistling or ratling noise at the acceleration of my Ram ProMaster City, then the sources of a noise that intensifies during acceleration and finally a noise that stops when I stop accelerating.
Ma Ram ProMaster City makes a high-pitched noise when I accelerate:
If your Ram ProMaster City produces a loud noise when you accelerate, it is quite plausible that the alternator belt is the reason of your issue. You will need to define if this noise shows up suddenly and if it can stop as it started. The alternator belt is a wearing part that is employed to carry power to the secondary components of your Ram ProMaster City’s engine and although it is less important than the timing belt it can generate engine failure if it fails. This sound may be a symptom of a slackened belt, in which case the tensioner roller or its wear and tear may be responsible. In any case, examine the state of your belt and its tension. If it causes this acceleration noise on Ram ProMaster City, go to your technician.
Ma Ram ProMaster City makes whining noise when I accelerate:
- Rattling or whistling noise created by the turbo
- Humming noise caused by air leakage
If you have a power loss that occurs with the rattling noise when you accelerate with your Ram ProMaster City, it is possible that your turbo is failing and some of its elements are at the end of their life. Check it and change it if it is the reason, otherwise you risk blockage your engine in the long run. If you perceive this blowing or whistling sound on your car, feel free to read this content about turbo noises on Ram ProMaster City, if you would like more info.
If, on the other hand, you do not feel any power loss due to an humming noise on your Ram ProMaster City, it is more than likely that you have one of your junctions or air hoses that has holes. So examine the entire air supply system from your air filter to your engine to determine the starting point of this acceleration sound.
Ma Ram ProMaster City produces an increasingly loud noise when I accelerate:
If, on the other hand, you have the feeling that the more you gain speed, the more your noise at acceleration on Ram ProMaster City gets loud, then you will have to look at the rolling parts of your automobile. Indeed, if this loud noise does not appear when you iddle, it is necessarily in connection with your transmission, and, in general, to your wheels. The most common cause is the state of your bearings, so make sure you examine their condition to make sure it is not the cause of this loud noise when you accelerate. If not, go to this document about the noises related to Ram ProMaster City noise wheels.
Ma Ram ProMaster City produces a noise when I accelerate that ends when I stop accelerating:
To finish, if you experience a noise when accelerating with your Ram ProMaster City and this noise which could be a cliking sound tends to reduce when you disengage (press the clutch pedal), then one of the wear parts of your clutch system may be the cause. Indeed, the clutch release bearings must be changed almost every 120 000 / 130 000km. To test it, you just have to see if you have more difficulty than usual shifting gears, if you feel a resistance either stronger or non-existent in the clutch pedal. If you have any of these symptoms, go to your technician to replace the clutch release bearings on your Ram ProMaster City. Go through our article on clutch noise on Ram ProMaster City for more information.
