Occasionally your car can produce sounds in the front right, you are very rarely reassured by this sort of noise and you right away begin to think that you will loose a wheel or that the repair will cost you an massive sum. So, what if you recognize a noise coming from the front right of your Nissan Almera? It may not be much and you can repair the issue yourself, but if in doubt it is better to check before a larger troubles happens. It is with this in mind that we have decided to compose this content and allow you to locate the issue and find a solution. We will, through several steps review all the elements that can create noises at the front right of your Nissan Almera. 
What are the components that can provoke front right noise Nissan Almera?
Most of our work will focus on finding the element that gives your Nissan Almera front wheel noise. The following is a list of the components that are most likely to be causing it and how to verify it.
Grinding noise front right wheel Nissan Almera : the shock absorber cup
One of the most common reason of symptoms on your Nissan Almera front right wheel noise is advanced wear and tear on your suspension unit. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its function and during small jolts that compress the suspension systems. To check if this is the issue that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front right as you pass over holes. If these are the cups, think about changing them soon as this may damage other parts and require more pricey repairs.
Noise while turning front right Nissan Almera : stabilizer bar
If you recognise a noise when turning on your front right wheel Nissan Almera at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is defective. To verify the origin of the issue, you may experience a lack of balance in the direction of the vehicle (it pulls to the right or it pulls to the right). In addition, you can position yourself on the right side of your front wheels and try to shake your wheel vigorously, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Front right noise when turning Nissan Almera : direction triangles
Finally, you may have a noise in the front right wheel on your Nissan Almera, when you are accelerating, brake or at any other random moment. It is likely that the cause of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto technician.
Loud knocking or grinding noise front right Nissan Almera : bearings
One of the other probable origins of symptoms of the front right grinding or knocking noise on your Nissan Almera, may be that one of your bearging is tired, it will start to make a thumping noise that raises when it is under stress (turns faster and faster). So make sure to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them soon. If, on the other hand, this noise only happens with an engaged speed, check out our article on loud noises on Nissan Almera, you will surely find a response to your issue.
Front right wheel noise squeaking Nissan Almera : cardan shaft
One of the most common causes when noise happens on the front right of your Nissan Almera when you turn with your vehicle is connected to the direction of your vehicle. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Nissan Almera, do not hesitate to consult this article to find the solution to your problem.
