Occasionally your car can make sounds in the front right, you are very rarely reassured by this types of noise and you immediately start to think that you will loose a wheel or that the fix will cost you an huge sum. Thus, what if you uncover a noise coming from the front right of your Mitsubishi Asx? It may not be much and you can correct the problem yourself, but if in doubt it is better to check before a larger troubles appears. It is with this in mind that we have decided to produce this content and allow you to locate the problem and find a solution. We will, through different steps review all the components that can create noises at the front right of your Mitsubishi Asx. 
What are the elements that can create front right noise Mitsubishi Asx?
Most of our article will focus on finding the part that gives your Mitsubishi Asx front wheel noise. The following is a list of the components that are most likely to be making it and how to confirm it.
Grinding noise front right wheel Mitsubishi Asx : the shock absorber cup
One of the most classic reason of symptoms on your Mitsubishi Asx front right wheel noise is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To check if this is the problem that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front right as you pass over holes. If these are the cups, consider replacing them quickly as this may affect other components and require more costly repairs.
Noise while turning front right Mitsubishi Asx : stabilizer bar
If you detect a noise when turning on your front right wheel Mitsubishi Asx at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely related to one of the elements of your stabilizer bar that is defective. To confirm the source of the problem, you may find a lack of stability in the direction of the car (it pulls to the right or it pulls to the right). Also, you can position yourself on the right side of your front wheels and try to shake your wheel powerfully, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Front right noise when turning Mitsubishi Asx : direction triangles
Finally, you may have a noise in the front right wheel on your Mitsubishi Asx, when you are accelerating, brake or at any other random moment. It is likely that the reason of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the state of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your mechanic.
Loud knocking or grinding noise front right Mitsubishi Asx : bearings
One of the other probable origins of symptoms of the front right grinding or knocking noise on your Mitsubishi Asx, may be that one of your bearging is tired, it will start to make a thumping noise that raises when it is under stress (turns faster and faster). So make sure to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them quickly. If, on the other hand, this noise only shows up with an engaged speed, read our article on loud noises on Mitsubishi Asx, you will probably find a solution to your problem.
Front right wheel noise squeaking Mitsubishi Asx : cardan shaft
One of the most common causes when noise shows up on the front right of your Mitsubishi Asx when you turn with your car is in connection with the direction of your car. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Mitsubishi Asx, do not hesitate to consult this article to find the solution to your problem.
