Do you listen a metallic noise on your Volkswagen Polo 6 once you drive? We know that this is not pleasurable and that you are wandering. Listening such a noise is not always a good sign, but it may also be nothing serious. To help you fix this issue, our redaction decided to write this content to assist you in this investigation. In order to perform this research as efficiently as possible, we will first check out the plausible sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Volkswagen Polo 6 coming from the front end of the vehicle
I notice a metal rattling noise coming from wheels
- Metallic noise coming from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise manifestations on your Volkswagen Polo 6, may be that one of your bearing is tired, it will commonly generate a loud noise that raises when stressed (turns faster and faster). So keep in mind to verify by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well based here, if this is the case replace it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this report on loud noise on Volkswagen Polo 6, you will most likely find a solution to your issue.
If you notice a metalic noise on Volkswagen Polo 6 and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will create a strong metallic rubbing noise that you will inevitably feel. To verify this, put your vehicle on safety stand, and verify the state of your discs and pads by removing the wheel. If they are involved, replace them quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your vehicle, and you want infos about it, read this guide for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you notice a metallic noise on your Volkswagen Polo 6, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will induce a metallic snap when they hit or change direction. To verify this, position yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we advise that you read this content for a complete guide about steering noises on Volkswagen Polo 6.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are harmed, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Volkswagen Polo 6. Once screwed up, they will no longer accomplish their purpose as shock absorbers and, with each impact, or violent acceleration, a noise will arise. Therefore, keep in mind to verify their status and replace them if required. Feel free to read this content which is a complete file about strut mounts noises on Volkswagen Polo 6, how to verify their state and replace them.
Finally, the last classic cause of metallic noise on Volkswagen Polo 6. It’s because your transmission system is the source. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then create a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we advise that you read this detailed guide on the origins of steering noises on Volkswagen Polo 6.
Metallic noise Volkswagen Polo 6 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you notice an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. In fact, it is plausible that either the catalyst or the silencer may be the cause of this noise. To be certain, go under the vehicle, cold, and knock each of the previously stated elements with a hammer to establish the source of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on changing it, as well as the silencer. In such a case, to stop the metallic noise on your Volkswagen Polo 6, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is plausible that with wear they are at the origin of your metallic noises on your Volkswagen Polo 6. Go a little further up in the document where you will find details of the solution already exposed for the front part of the vehicle.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
