Do you notice a metallic noise on your Volkswagen Crafter when you drive? We understand that this is not pleasurable and that you are wandering. Experiencing such a noise is not always a good indicator, but it may also be nothing severe. To help you fix this problem, our redaction decided to produce this content page to assist you in this investigation. In order to perform this research as effectively as possible, we will first have a look at the possible sources of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Volkswagen Crafter coming from the front end of the car
I acknowledge a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely causes of metal noise manifestations on your Volkswagen Crafter, may be that one of your bearing is tired, it will frequently make a loud noise that increases when stressed (turns faster and faster). So remember to check by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well established here, if this is the case change it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this article on loud noise on Volkswagen Crafter, you will most likely find a remedy to your problem.
If you notice a metalic noise on Volkswagen Crafter and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To check this, put your car on safety stand, and check the condition of your discs and pads by removing the wheel. If they are involved, change them as soon as possible , otherwise you will no longer be able to brake. If you experience a metallic noise from your car, and you want infos about it, browse this guide for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you acknowledge a metallic noise on your Volkswagen Crafter, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To check this, position yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we encourage that you have a look at this content page for a complete guide about steering noises on Volkswagen Crafter.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are harmed, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Volkswagen Crafter. Once screwed up, they will no longer fulfill their function as shock absorbers and, with each impact, or violent acceleration, a noise will arise. Therefore, please remember to check their status and change them if needed. Feel free to have a look at this content page which is a complete file about strut mounts noises on Volkswagen Crafter, how to check their condition and swap them.
Finally, the last typical reason of metallic noise on Volkswagen Crafter. It’s because your transmission system is the source. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then make a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we encourage that you look at this detailed guide on the sources of steering noises on Volkswagen Crafter.
Metallic noise Volkswagen Crafter coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you hear an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. Indeed, it is possible that either the catalyst or the silencer may be the reason of this sound. To be sure, go under the car, cold, and knock each of the previously stated parts with a hammer to find the source of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to consider swapping it, as well as the silencer. In cases like this, to stop the metallic noise on your Volkswagen Crafter, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is possible that with wear they are at the origin of your metallic noises on your Volkswagen Crafter. Go a little further up in the article content where you will find details of the solution already exposed for the front part of the car.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
