Do you hear a metallic noise on your Toyota C-hr when ever you drive? We know that this is not pleasant and that you are wandering. Finding out such a noise is not always a good sign, but it may also be nothing serious. To support you fix this trouble, our redaction decided to write this article content to assist you in this investigation. In order to execute this research as efficiently as possible, we will first look into the plausible origins of metallic noise in the front of your automobile, and then, if the metallic noise comes from the rear of your automobile.
Metal noise Toyota C-hr coming from the front end of the automobile
I listen a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise manifestations on your Toyota C-hr, may be that one of your bearing is tired, it will commonly make a loud noise that increases when stressed (turns faster and faster). So please remember to check by taking speed (neutral gear and window open to give consideration only to noise of the wheels) that the noise is well located here, if this is the case replace it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this guide on loud noise on Toyota C-hr, you will most likely find a remedy to your trouble.
If you discern a metalic noise on Toyota C-hr and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will make a strong metallic rubbing noise that you will inevitably feel. To check this, put your automobile on safety stand, and check the state of your discs and pads by removing the wheel. If they are involved, replace them as soon as possible , otherwise you will no longer be able to brake. If you feel a metallic noise from your automobile, and you want informations about it, examine this guide for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you listen a metallic noise on your Toyota C-hr, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To check this, position yourself under your automobile, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we would suggest that you consult this article content for a complete guide about steering noises on Toyota C-hr.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are harmed, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Toyota C-hr. Once screwed up, they will no longer fulfill their role as shock absorbers and, with each impact, or violent acceleration, a noise will occur. Therefore, take into account to check their status and replace them if needed. Feel free to consult this article content which is a complete file about strut mounts noises on Toyota C-hr, how to check their state and swap them.
Finally, the last typical cause of metallic noise on Toyota C-hr. It’s because your transmission system is the origin. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then develop a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we would suggest that you read this detailed guide on the sources of steering noises on Toyota C-hr.
Metallic noise Toyota C-hr coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you feel an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. In fact, it is plausible that either the catalyst or the silencer may be the cause of this sound. To be sure, go under the automobile, cold, and knock each of the previously stated elements with a hammer to locate the origin of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on changing it, as well as the silencer. In cases like this, to eliminate the metallic noise on your Toyota C-hr, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your automobile, it is plausible that with wear they are at the origin of your metallic noises on your Toyota C-hr. Go a little further up in the content where you will find information of the solution already exposed for the front part of the automobile.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
