Do you perceive a metallic noise on your Suzuki Alto when you drive? We know that this is not relaxing and that you are wandering. Hearing such a noise is not always a good indicator, but it may also be nothing serious. To help you fix this problem, we have decided to compose this content to help you in this search. In order to accomplish this research as efficiently as possible, we will first check out the plausible origins of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Suzuki Alto coming from the front end of the car
I listen a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise symptoms on your Suzuki Alto, may be that one of your bearing is tired, it will tend to produce a loud noise that goes up when stressed (turns faster and faster). So please remember to examine by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well located here, if this is the case change it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this guide on loud noise on Suzuki Alto, you will most likely find a solution to your problem.
If you notice a metalic noise on Suzuki Alto and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To examine this, put your car on safety stand, and examine the condition of your discs and pads by removing the wheel. If they are involved, change them quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your car, and you want explications about it, go through this article for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you listen a metallic noise on your Suzuki Alto, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To examine this, position yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we recommend that you consult this content for a complete guide about steering noises on Suzuki Alto.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Suzuki Alto. Once screwed up, they will no longer accomplish their task as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, remember to examine their status and change them if needed. Feel free to browse this content which is a complete file about strut mounts noises on Suzuki Alto, how to examine their condition and replace them.
Finally, the last common trigger of metallic noise on Suzuki Alto. It’s because your transmission system is the source. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then create a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we recommend that you read this detailed guide on the sources of steering noises on Suzuki Alto.
Metallic noise Suzuki Alto coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you discern an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. Indeed, it is plausible that either the catalyst or the silencer may be the trigger of this noise. To be sure, go under the car, cold, and knock each of the previously stated units with a hammer to determine the source of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider swapping it, as well as the silencer. In this instance, to stop the metallic noise on your Suzuki Alto, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is plausible that with wear they are at the origin of your metallic noises on your Suzuki Alto. Go a little further up in the article content where you will find information of the solution already exposed for the front part of the car.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
