Do you experience a metallic noise on your Ram ProMaster every time you drive? We know that this is not relaxing and that you are wandering. Hearing such a noise is not always a good indicator, but it may also be nothing major. To support you remedy this issue, our redaction decided to prepare this content to help you in this search. In order to execute this research as accurately as possible, we will first look at the possible sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Ram ProMaster coming from the front end of the vehicle
I experience a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise manifestations on your Ram ProMaster, may be that one of your bearing is tired, it will tend to generate a loud noise that increase when stressed (turns faster and faster). So please remember to examine by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this article on loud noise on Ram ProMaster, you will most likely find a solution to your issue.
If you discern a metalic noise on Ram ProMaster and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To examine this, put your vehicle on safety stand, and examine the state of your discs and pads by taking away the wheel. If they are involved, swap them fairly quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your vehicle, and you want informations about it, examine this article for more details about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you experience a metallic noise on your Ram ProMaster, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To examine this, put yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we would suggest that you read this content for a complete guide about steering noises on Ram ProMaster.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are harmed, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Ram ProMaster. Once screwed up, they will no longer accomplish their function as shock absorbers and, with each impact, or violent acceleration, a noise will come out. Therefore, take into account to examine their status and swap them if required. Feel free to consult this content which is a complete file about strut mounts noises on Ram ProMaster, how to examine their state and replace them.
Finally, the last classic reason of metallic noise on Ram ProMaster. It’s because your transmission system is the origin. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then develop a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we would suggest that you look at this detailed guide on the sources of steering noises on Ram ProMaster.
Metallic noise Ram ProMaster coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you notice an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. In fact, it is possible that either the catalyst or the silencer may be the reason of this noise. To be certain, go under the vehicle, cold, and knock each of the previously stated components with a hammer to find the origin of the noise. You should perceive things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to reflect on changing it, as well as the silencer. In this instance, to stop the metallic noise on your Ram ProMaster, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is possible that with wear they are at the origin of your metallic noises on your Ram ProMaster. Go a little further up in the article content where you will find information of the solution already exposed for the front part of the vehicle.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
