Do you listen a metallic noise on your Peugeot Boxer 2 every time you drive? We understand that this is not pleasant and that you have questions. Finding out such a noise is not always a good sign, but it may also be nothing serious. To help you solve this trouble, we have decided to prepare this content page to assist you in this investigation. In order to accomplish this research as effectively as possible, we will first have a look at the conceivable origins of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Peugeot Boxer 2 coming from the front end of the car
I notice a metal rattling noise coming from wheels
- Metallic noise coming from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely causes of metal noise manifestations on your Peugeot Boxer 2, may be that one of your bearing is tired, it will frequently make a loud noise that increases when stressed (turns faster and faster). So take into account to check by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well established here, if this is the case replace it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, browse this guide on loud noise on Peugeot Boxer 2, you will most likely find a remedy to your trouble.
If you experience a metalic noise on Peugeot Boxer 2 and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will generate a strong metallic friction noise that you will inevitably feel. To check this, put your car on safety stand, and check the state of your discs and pads by getting rid of the wheel. If they are involved, replace them fairly quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your car, and you want infos about it, go through this article for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you notice a metallic noise on your Peugeot Boxer 2, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To check this, put yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we recommend that you consult this content page for a complete guide about steering noises on Peugeot Boxer 2.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are harmed, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Peugeot Boxer 2. Once screwed up, they will no longer fulfill their task as shock absorbers and, with each impact, or violent acceleration, a noise will occur. Therefore, keep in mind to check their status and replace them if required. Feel free to read this content page which is a complete file about strut mounts noises on Peugeot Boxer 2, how to check their state and change them.
Finally, the last typical cause of metallic noise on Peugeot Boxer 2. It’s because your transmission system is the source. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then generate a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we recommend that you browse this detailed guide on the sources of steering noises on Peugeot Boxer 2.
Metallic noise Peugeot Boxer 2 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you feel an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. Indeed, it is conceivable that either the catalyst or the silencer may be the cause of this sound. To be sure, go under the car, cold, and knock each of the previously stated elements with a hammer to determine the source of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider changing it, as well as the silencer. In cases like this, to eliminate the metallic noise on your Peugeot Boxer 2, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is conceivable that with wear they are at the origin of your metallic noises on your Peugeot Boxer 2. Go a little further up in the content where you will find details of the solution already exposed for the front part of the car.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
