Do you hear a metallic noise on your Peugeot 806 when ever you drive? We understand that this is not enjoyable and that you are wandering. Listening such a noise is not always a good signal, but it may also be nothing severe. To support you eliminate this trouble, our team has decided to produce this article content to assist you in this investigation. In order to carry out this research as accurately as possible, we will first take a look at the conceivable origins of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Peugeot 806 coming from the front end of the vehicle
I notice a metal rattling noise coming from wheels
- Metallic noise coming from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the possible causes of metal noise manifestations on your Peugeot 806, may be that one of your bearing is tired, it will commonly generate a loud noise that increases when stressed (turns faster and faster). So think about to examine by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well located here, if this is the case change it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this guide on loud noise on Peugeot 806, you will most likely find a solution to your trouble.
If you encounter a metalic noise on Peugeot 806 and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will create a strong metallic friction noise that you will inevitably feel. To examine this, put your vehicle on safety stand, and examine the condition of your discs and pads by taking away the wheel. If they are involved, change them fairly quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your vehicle, and you want infos about it, examine this guide for more details about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you notice a metallic noise on your Peugeot 806, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To examine this, put yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we encourage that you browse this article content for a complete guide about steering noises on Peugeot 806.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Peugeot 806. Once screwed up, they will no longer accomplish their role as shock absorbers and, with each impact, or violent acceleration, a noise will arise. Therefore, remember to examine their status and change them if needed. Feel free to browse this article content which is a complete file about strut mounts noises on Peugeot 806, how to examine their condition and replace them.
Finally, the last classic reason of metallic noise on Peugeot 806. It’s because your transmission system is the source. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then develop a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we encourage that you browse this detailed guide on the sources of steering noises on Peugeot 806.
Metallic noise Peugeot 806 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you hear an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. In fact, it is conceivable that either the catalyst or the silencer may be the reason of this noise. To be certain, go under the vehicle, cold, and knock each of the previously stated parts with a hammer to identify the source of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on swapping it, as well as the silencer. In this case, to stop the metallic noise on your Peugeot 806, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is conceivable that with wear they are at the origin of your metallic noises on your Peugeot 806. Go a little further up in the content page where you will find information of the solution already exposed for the front part of the vehicle.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
