Do you notice a metallic noise on your Peugeot 508 when you drive? We know that this is not pleasurable and that you have questions. Discovering such a noise is not always a good indicator, but it may also be nothing major. To support you fix this problem, our redaction decided to write this article to help you in this research. In order to conduct this research as efficiently as possible, we will first take a look at the plausible sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Peugeot 508 coming from the front end of the vehicle
I listen a metal rattling noise coming from wheels
- Metallic noise originating from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely causes of metal noise manifestations on your Peugeot 508, may be that one of your bearing is tired, it will tend to produce a loud noise that increase when stressed (turns faster and faster). So bear in mind to examine by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this report on loud noise on Peugeot 508, you will most likely find a solution to your problem.
If you notice a metalic noise on Peugeot 508 and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will create a strong metallic friction noise that you will inevitably feel. To examine this, put your vehicle on safety stand, and examine the state of your discs and pads by removing the wheel. If they are involved, swap them as soon as possible , otherwise you will no longer be able to brake. If you encounter a metallic noise from your vehicle, and you want explications about it, go through this article for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you listen a metallic noise on your Peugeot 508, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will induce a metallic snap when they hit or change direction. To examine this, position yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we recommend that you read this article for a complete guide about steering noises on Peugeot 508.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Peugeot 508. Once screwed up, they will no longer accomplish their role as shock absorbers and, with each impact, or violent acceleration, a noise will arise. Therefore, please remember to examine their status and swap them if required. Feel free to browse this article which is a complete file about strut mounts noises on Peugeot 508, how to examine their state and swap them.
Finally, the last classic cause of metallic noise on Peugeot 508. It’s because your transmission system is the source. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then generate a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we recommend that you look at this detailed guide on the sources of steering noises on Peugeot 508.
Metallic noise Peugeot 508 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you are subject to an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. In fact, it is plausible that either the catalyst or the silencer may be the cause of this noise. To be sure, go under the vehicle, cold, and knock each of the previously stated parts with a hammer to discern the source of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to reflect on changing it, as well as the silencer. In this instance, to eliminate the metallic noise on your Peugeot 508, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is plausible that with wear they are at the origin of your metallic noises on your Peugeot 508. Go a little further up in the article where you will find details of the solution already exposed for the front part of the vehicle.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
