Do you listen to a metallic noise on your Nissan Almera when ever you drive? We can understand that this is not pleasant and that you have questions. Finding out such a noise is not always a good sign, but it may also be nothing severe. To support you resolve this problem, we have decided to produce this content to assist you in this search. In order to carry out this research as efficiently as possible, we will first have a look at the possible sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Nissan Almera coming from the front end of the vehicle
I hear a metal rattling noise coming from wheels
- Metallic noise coming from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the probable causes of metal noise symptoms on your Nissan Almera, may be that one of your bearing is tired, it will commonly generate a loud noise that increases when stressed (turns faster and faster). So think about to verify by taking speed (neutral gear and window open to listen only to noise of the wheels) that the noise is well located here, if this is the case swap it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide on loud noise on Nissan Almera, you will most likely find a remedy to your problem.
If you notice a metalic noise on Nissan Almera and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will create a strong metallic rubbing noise that you will inevitably feel. To verify this, put your vehicle on safety stand, and verify the condition of your discs and pads by taking away the wheel. If they are involved, swap them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your vehicle, and you want informations about it, go through this article for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you hear a metallic noise on your Nissan Almera, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To verify this, position yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we would suggest that you read this content for a complete guide about steering noises on Nissan Almera.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Nissan Almera. Once screwed up, they will no longer fulfill their purpose as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, remember to verify their status and swap them if needed. Feel free to read this content which is a complete file about strut mounts noises on Nissan Almera, how to verify their condition and change them.
Finally, the last classic reason of metallic noise on Nissan Almera. It’s because your transmission system is the origin. It is possible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then create a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we would suggest that you read this detailed guide on the sources of steering noises on Nissan Almera.
Metallic noise Nissan Almera coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you experience an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. Indeed, it is possible that either the catalyst or the silencer may be the reason of this sound. To be sure, go under the vehicle, cold, and knock each of the previously stated parts with a hammer to establish the origin of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on changing it, as well as the silencer. In this instance, to eliminate the metallic noise on your Nissan Almera, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is possible that with wear they are at the origin of your metallic noises on your Nissan Almera. Go a little further up in the content where you will find information of the solution already exposed for the front part of the vehicle.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
