Do you perceive a metallic noise on your Mitsubishi L200 when you drive? We can understand that this is not relaxing and that you have questions. Listening such a noise is not always a good sign, but it may also be nothing major. To help you fix this issue, our redaction decided to prepare this article content to help you in this search. In order to conduct this research as effectively as possible, we will first check out the possible sources of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Mitsubishi L200 coming from the front end of the car
I acknowledge a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the probable triggers of metal noise symptoms on your Mitsubishi L200, may be that one of your bearing is tired, it will tend to generate a loud noise that raises when stressed (turns faster and faster). So take into account to check by taking speed (neutral gear and window open to give consideration only to noise of the wheels) that the noise is well established here, if this is the case change it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this report on loud noise on Mitsubishi L200, you will most likely find a remedy to your issue.
If you encounter a metalic noise on Mitsubishi L200 and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will create a strong metallic friction noise that you will inevitably feel. To check this, put your car on safety stand, and check the state of your discs and pads by taking out the wheel. If they are involved, change them quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your car, and you want explications about it, read this guide for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you acknowledge a metallic noise on your Mitsubishi L200, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will induce a metallic snap when they hit or change direction. To check this, put yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we recommend highly that you read this article content for a complete guide about steering noises on Mitsubishi L200.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Mitsubishi L200. Once screwed up, they will no longer fulfill their function as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, keep in mind to check their status and change them if required. Feel free to have a look at this article content which is a complete file about strut mounts noises on Mitsubishi L200, how to check their state and swap them.
Finally, the last classic cause of metallic noise on Mitsubishi L200. It’s because your transmission system is the origin. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then make a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we recommend highly that you read this detailed guide on the sources of steering noises on Mitsubishi L200.
Metallic noise Mitsubishi L200 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you discern an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. In fact, it is possible that either the catalyst or the silencer may be the cause of this sound. To be certain, go under the car, cold, and knock each of the previously stated elements with a hammer to identify the origin of the noise. You should acknowledge things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on swapping it, as well as the silencer. In this instance, to stop the metallic noise on your Mitsubishi L200, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is possible that with wear they are at the origin of your metallic noises on your Mitsubishi L200. Go a little further up in the article where you will find details of the solution already exposed for the front part of the car.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
