Do you listen to a metallic noise on your Mazda 6 when ever you drive? We understand that this is not pleasurable and that you have questions. Discovering such a noise is not always a good sign, but it may also be nothing serious. To help you remedy this problem, our redaction decided to prepare this article to assist you in this search. In order to accomplish this research as accurately as possible, we will first look at the possible sources of metallic noise in the front of your automobile, and then, if the metallic noise comes from the rear of your automobile.
Metal noise Mazda 6 coming from the front end of the automobile
I experience a metal rattling noise coming from wheels
- Metallic noise originating from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the probable causes of metal noise symptoms on your Mazda 6, may be that one of your bearing is tired, it will commonly generate a loud noise that increases when stressed (turns faster and faster). So think about to verify by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well located here, if this is the case change it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this guide on loud noise on Mazda 6, you will most likely find a solution to your problem.
If you discern a metalic noise on Mazda 6 and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will generate a strong metallic friction noise that you will inevitably feel. To verify this, put your automobile on safety stand, and verify the state of your discs and pads by taking away the wheel. If they are involved, change them as soon as possible , otherwise you will no longer be able to brake. If you feel a metallic noise from your automobile, and you want infos about it, examine this article for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you experience a metallic noise on your Mazda 6, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To verify this, put yourself under your automobile, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we recommend that you read this article for a complete guide about steering noises on Mazda 6.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Mazda 6. Once screwed up, they will no longer fulfill their task as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, remember to verify their status and change them if needed. Feel free to have a look at this article which is a complete file about strut mounts noises on Mazda 6, how to verify their state and swap them.
Finally, the last common reason of metallic noise on Mazda 6. It’s because your transmission system is the origin. It is possible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then create a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we recommend that you read this detailed guide on the sources of steering noises on Mazda 6.
Metallic noise Mazda 6 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you discern an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. Indeed, it is possible that either the catalyst or the silencer may be the reason of this noise. To be certain, go under the automobile, cold, and knock each of the previously stated parts with a hammer to identify the origin of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on replacing it, as well as the silencer. In such a case, to stop the metallic noise on your Mazda 6, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your automobile, it is possible that with wear they are at the origin of your metallic noises on your Mazda 6. Go a little further up in the content page where you will find information of the solution already exposed for the front part of the automobile.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
