Do you notice a metallic noise on your Mazda 3 when you drive? We understand that this is not relaxing and that you have questions. Finding out such a noise is not always a good signal, but it may also be nothing serious. To help you fix this trouble, our redaction decided to compose this article content to help you in this investigation. In order to carry out this research as effectively as possible, we will first look at the conceivable origins of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Mazda 3 coming from the front end of the vehicle
I experience a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the possible triggers of metal noise manifestations on your Mazda 3, may be that one of your bearing is tired, it will frequently make a loud noise that increases when stressed (turns faster and faster). So think about to check by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well based here, if this is the case replace it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, browse this article on loud noise on Mazda 3, you will most likely find a remedy to your trouble.
If you experience a metalic noise on Mazda 3 and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will generate a strong metallic rubbing noise that you will inevitably feel. To check this, put your vehicle on safety stand, and check the condition of your discs and pads by taking away the wheel. If they are involved, replace them as soon as possible , otherwise you will no longer be able to brake. If you feel a metallic noise from your vehicle, and you want explications about it, examine this guide for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you experience a metallic noise on your Mazda 3, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To check this, position yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we advise that you browse this article content for a complete guide about steering noises on Mazda 3.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are harmed, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Mazda 3. Once screwed up, they will no longer fulfill their role as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, please remember to check their status and replace them if necessary. Feel free to read this article content which is a complete file about strut mounts noises on Mazda 3, how to check their condition and change them.
Finally, the last typical cause of metallic noise on Mazda 3. It’s because your transmission system is the origin. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then develop a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we advise that you read this detailed guide on the sources of steering noises on Mazda 3.
Metallic noise Mazda 3 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you experience an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. In fact, it is conceivable that either the catalyst or the silencer may be the cause of this sound. To be sure, go under the vehicle, cold, and knock each of the previously stated components with a hammer to locate the origin of the noise. You should acknowledge things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to reflect on replacing it, as well as the silencer. In cases like this, to stop the metallic noise on your Mazda 3, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is conceivable that with wear they are at the origin of your metallic noises on your Mazda 3. Go a little further up in the content where you will find details of the solution already exposed for the front part of the vehicle.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
