Do you perceive a metallic noise on your Lancia Ypsilon when ever you drive? We know that this is not pleasant and that you have questions. Hearing such a noise is not always a good signal, but it may also be nothing major. To support you remedy this problem, our team has decided to produce this content to assist you in this research. In order to accomplish this research as accurately as possible, we will first have a look at the possible sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Lancia Ypsilon coming from the front end of the vehicle
I listen a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise manifestations on your Lancia Ypsilon, may be that one of your bearing is tired, it will commonly make a loud noise that increase when stressed (turns faster and faster). So take into account to check by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well based here, if this is the case replace it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide on loud noise on Lancia Ypsilon, you will most likely find a remedy to your problem.
If you notice a metalic noise on Lancia Ypsilon and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will generate a strong metallic rubbing noise that you will inevitably feel. To check this, put your vehicle on safety stand, and check the state of your discs and pads by taking away the wheel. If they are involved, replace them fairly quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your vehicle, and you want infos about it, browse this article for more details about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you listen a metallic noise on your Lancia Ypsilon, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will induce a metallic snap when they hit or change direction. To check this, put yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we advise that you consult this content for a complete guide about steering noises on Lancia Ypsilon.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Lancia Ypsilon. Once screwed up, they will no longer fulfill their task as shock absorbers and, with each impact, or violent acceleration, a noise will occur. Therefore, remember to check their status and replace them if required. Feel free to have a look at this content which is a complete file about strut mounts noises on Lancia Ypsilon, how to check their state and swap them.
Finally, the last basic cause of metallic noise on Lancia Ypsilon. It’s because your transmission system is the origin. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then make a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we advise that you browse this detailed guide on the origins of steering noises on Lancia Ypsilon.
Metallic noise Lancia Ypsilon coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you are subject to an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. Indeed, it is possible that either the catalyst or the silencer may be the cause of this sound. To be certain, go under the vehicle, cold, and knock each of the previously stated units with a hammer to determine the origin of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to reflect on changing it, as well as the silencer. In such a case, to eliminate the metallic noise on your Lancia Ypsilon, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is possible that with wear they are at the origin of your metallic noises on your Lancia Ypsilon. Go a little further up in the content page where you will find details of the solution already exposed for the front part of the vehicle.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
