Do you hear a metallic noise on your Jeep Liberty once you drive? We understand that this is not relaxing and that you have questions. Discovering such a noise is not always a good sign, but it may also be nothing serious. To help you resolve this problem, our team has decided to compose this content page to help you in this search. In order to execute this research as efficiently as possible, we will first look into the possible sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Jeep Liberty coming from the front end of the vehicle
I listen a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise manifestations on your Jeep Liberty, may be that one of your bearing is tired, it will commonly generate a loud noise that increase when stressed (turns faster and faster). So remember to verify by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well established here, if this is the case change it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide on loud noise on Jeep Liberty, you will most likely find a solution to your problem.
If you encounter a metalic noise on Jeep Liberty and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will create a strong metallic rubbing noise that you will inevitably feel. To verify this, put your vehicle on safety stand, and verify the condition of your discs and pads by getting rid of the wheel. If they are involved, change them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your vehicle, and you want infos about it, examine this article for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you listen a metallic noise on your Jeep Liberty, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To verify this, position yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we recommend highly that you read this content page for a complete guide about steering noises on Jeep Liberty.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Jeep Liberty. Once screwed up, they will no longer accomplish their function as shock absorbers and, with each impact, or violent acceleration, a noise will occur. Therefore, keep in mind to verify their status and change them if needed. Feel free to read this content page which is a complete file about strut mounts noises on Jeep Liberty, how to verify their condition and replace them.
Finally, the last typical trigger of metallic noise on Jeep Liberty. It’s because your transmission system is the origin. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then develop a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we recommend highly that you browse this detailed guide on the origins of steering noises on Jeep Liberty.
Metallic noise Jeep Liberty coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you feel an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. Indeed, it is possible that either the catalyst or the silencer may be the trigger of this sound. To be certain, go under the vehicle, cold, and knock each of the previously stated parts with a hammer to identify the origin of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to consider replacing it, as well as the silencer. In cases like this, to stop the metallic noise on your Jeep Liberty, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is possible that with wear they are at the origin of your metallic noises on your Jeep Liberty. Go a little further up in the article where you will find details of the solution already exposed for the front part of the vehicle.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
