Do you perceive a metallic noise on your Hyundai Bayon once you drive? We understand that this is not enjoyable and that you have questions. Listening such a noise is not always a good sign, but it may also be nothing major. To help you remedy this problem, we have decided to produce this article content to help you in this research. In order to accomplish this research as effectively as possible, we will first have a look at the conceivable origins of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Hyundai Bayon coming from the front end of the car
I hear a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely causes of metal noise manifestations on your Hyundai Bayon, may be that one of your bearing is tired, it will frequently generate a loud noise that goes up when stressed (turns faster and faster). So think about to check by taking speed (neutral gear and window open to listen only to noise of the wheels) that the noise is well based here, if this is the case change it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, read this report on loud noise on Hyundai Bayon, you will most likely find a solution to your problem.
If you experience a metalic noise on Hyundai Bayon and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the trigger. In fact, a disc or a set of dead plates will generate a strong metallic rubbing noise that you will inevitably feel. To check this, put your car on safety stand, and check the condition of your discs and pads by taking away the wheel. If they are involved, change them quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your car, and you want explications about it, read this guide for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you hear a metallic noise on your Hyundai Bayon, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To check this, position yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we suggest that you read this article content for a complete guide about steering noises on Hyundai Bayon.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Hyundai Bayon. Once screwed up, they will no longer fulfill their task as shock absorbers and, with each impact, or violent acceleration, a noise will arise. Therefore, remember to check their status and change them if required. Feel free to browse this article content which is a complete file about strut mounts noises on Hyundai Bayon, how to check their condition and replace them.
Finally, the last common trigger of metallic noise on Hyundai Bayon. It’s because your transmission system is the source. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then make a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we suggest that you read this detailed guide on the origins of steering noises on Hyundai Bayon.
Metallic noise Hyundai Bayon coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you discern an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. In fact, it is conceivable that either the catalyst or the silencer may be the trigger of this sound. To be certain, go under the car, cold, and knock each of the previously stated components with a hammer to define the source of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to reflect on swapping it, as well as the silencer. In such a case, to eliminate the metallic noise on your Hyundai Bayon, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is conceivable that with wear they are at the origin of your metallic noises on your Hyundai Bayon. Go a little further up in the content page where you will find details of the solution already exposed for the front part of the car.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
