Do you experience a metallic noise on your Honda HR V when ever you drive? We can understand that this is not enjoyable and that you have questions. Listening such a noise is not always a good indication, but it may also be nothing severe. To help you fix this problem, our redaction decided to write this article content to assist you in this investigation. In order to execute this research as accurately as possible, we will first look at the conceivable sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Honda HR V coming from the front end of the vehicle
I perceive a metal rattling noise coming from wheels
- Metallic noise originating from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise symptoms on your Honda HR V, may be that one of your bearing is tired, it will frequently make a loud noise that raises when stressed (turns faster and faster). So keep in mind to check by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well based here, if this is the case swap it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide on loud noise on Honda HR V, you will most likely find a solution to your problem.
If you hear a metalic noise on Honda HR V and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will create a strong metallic friction noise that you will inevitably feel. To check this, put your vehicle on safety stand, and check the state of your discs and pads by taking out the wheel. If they are involved, swap them fairly quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your vehicle, and you want informations about it, read this guide for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you perceive a metallic noise on your Honda HR V, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To check this, position yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we encourage that you consult this article content for a complete guide about steering noises on Honda HR V.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Honda HR V. Once screwed up, they will no longer fulfill their task as shock absorbers and, with each impact, or violent acceleration, a noise will occur. Therefore, please remember to check their status and swap them if needed. Feel free to read this article content which is a complete file about strut mounts noises on Honda HR V, how to check their state and swap them.
Finally, the last typical cause of metallic noise on Honda HR V. It’s because your transmission system is the source. It is possible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then make a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we encourage that you browse this detailed guide on the origins of steering noises on Honda HR V.
Metallic noise Honda HR V coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you hear an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. Indeed, it is conceivable that either the catalyst or the silencer may be the cause of this sound. To be sure, go under the vehicle, cold, and knock each of the previously stated units with a hammer to determine the source of the noise. You should perceive things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider swapping it, as well as the silencer. In cases like this, to eliminate the metallic noise on your Honda HR V, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is conceivable that with wear they are at the origin of your metallic noises on your Honda HR V. Go a little further up in the document where you will find details of the solution already exposed for the front part of the vehicle.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
