Do you notice a metallic noise on your Honda CR V when ever you drive? We know that this is not pleasurable and that you have questions. Discovering such a noise is not always a good signal, but it may also be nothing major. To support you fix this issue, we have decided to create this article to assist you in this research. In order to carry out this research as efficiently as possible, we will first look into the plausible origins of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Honda CR V coming from the front end of the car
I perceive a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the probable triggers of metal noise manifestations on your Honda CR V, may be that one of your bearing is tired, it will frequently produce a loud noise that goes up when stressed (turns faster and faster). So remember to examine by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well based here, if this is the case replace it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this guide on loud noise on Honda CR V, you will most likely find a remedy to your issue.
If you hear a metalic noise on Honda CR V and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will create a strong metallic friction noise that you will inevitably feel. To examine this, put your car on safety stand, and examine the condition of your discs and pads by getting rid of the wheel. If they are involved, replace them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your car, and you want informations about it, examine this guide for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you perceive a metallic noise on your Honda CR V, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To examine this, position yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we would suggest that you read this article for a complete guide about steering noises on Honda CR V.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Honda CR V. Once screwed up, they will no longer accomplish their task as shock absorbers and, with each impact, or violent acceleration, a noise will come out. Therefore, please remember to examine their status and replace them if necessary. Feel free to consult this article which is a complete file about strut mounts noises on Honda CR V, how to examine their condition and swap them.
Finally, the last common cause of metallic noise on Honda CR V. It’s because your transmission system is the source. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then create a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we would suggest that you browse this detailed guide on the origins of steering noises on Honda CR V.
Metallic noise Honda CR V coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you are subject to an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. Indeed, it is plausible that either the catalyst or the silencer may be the cause of this noise. To be sure, go under the car, cold, and knock each of the previously stated units with a hammer to identify the source of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on swapping it, as well as the silencer. In this case, to stop the metallic noise on your Honda CR V, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is plausible that with wear they are at the origin of your metallic noises on your Honda CR V. Go a little further up in the article where you will find information of the solution already exposed for the front part of the car.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
