Do you listen a metallic noise on your Chrysler Pacifica when you drive? We can understand that this is not pleasurable and that you are wandering. Listening such a noise is not always a good indicator, but it may also be nothing serious. To help you solve this problem, we have decided to write this article to help you in this research. In order to carry out this research as efficiently as possible, we will first take a look at the possible origins of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Chrysler Pacifica coming from the front end of the car
I listen to a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely causes of metal noise symptoms on your Chrysler Pacifica, may be that one of your bearing is tired, it will commonly produce a loud noise that increase when stressed (turns faster and faster). So take into account to examine by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well based here, if this is the case change it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this report on loud noise on Chrysler Pacifica, you will most likely find a remedy to your problem.
If you hear a metalic noise on Chrysler Pacifica and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To examine this, put your car on safety stand, and examine the condition of your discs and pads by removing the wheel. If they are involved, change them promptly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your car, and you want explications about it, browse this guide for more details about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you listen to a metallic noise on your Chrysler Pacifica, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To examine this, position yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we advise that you read this article for a complete guide about steering noises on Chrysler Pacifica.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Chrysler Pacifica. Once screwed up, they will no longer accomplish their function as shock absorbers and, with each impact, or violent acceleration, a noise will come out. Therefore, remember to examine their status and change them if needed. Feel free to have a look at this article which is a complete file about strut mounts noises on Chrysler Pacifica, how to examine their condition and change them.
Finally, the last common reason of metallic noise on Chrysler Pacifica. It’s because your transmission system is the origin. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then develop a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we advise that you read this detailed guide on the origins of steering noises on Chrysler Pacifica.
Metallic noise Chrysler Pacifica coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you discern an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. Indeed, it is possible that either the catalyst or the silencer may be the reason of this sound. To be certain, go under the car, cold, and knock each of the previously stated components with a hammer to identify the origin of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider replacing it, as well as the silencer. In cases like this, to eliminate the metallic noise on your Chrysler Pacifica, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is possible that with wear they are at the origin of your metallic noises on your Chrysler Pacifica. Go a little further up in the document where you will find details of the solution already exposed for the front part of the car.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
