Do you listen a metallic noise on your Audi Q7 once you drive? We can understand that this is not relaxing and that you have questions. Listening such a noise is not always a good indication, but it may also be nothing major. To help you remedy this problem, our team has decided to compose this content page to assist you in this search. In order to conduct this research as accurately as possible, we will first have a look at the conceivable sources of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Audi Q7 coming from the front end of the car
I perceive a metal rattling noise coming from wheels
- Metallic noise originating from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the possible triggers of metal noise symptoms on your Audi Q7, may be that one of your bearing is tired, it will commonly make a loud noise that goes up when stressed (turns faster and faster). So please remember to verify by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well established here, if this is the case swap it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, browse this article on loud noise on Audi Q7, you will most likely find a solution to your problem.
If you experience a metalic noise on Audi Q7 and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will make a strong metallic rubbing noise that you will inevitably feel. To verify this, put your car on safety stand, and verify the state of your discs and pads by getting rid of the wheel. If they are involved, swap them fairly quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your car, and you want informations about it, examine this guide for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you perceive a metallic noise on your Audi Q7, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To verify this, put yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we advise that you have a look at this content page for a complete guide about steering noises on Audi Q7.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Audi Q7. Once screwed up, they will no longer fulfill their function as shock absorbers and, with each impact, or violent acceleration, a noise will come out. Therefore, remember to verify their status and swap them if required. Feel free to browse this content page which is a complete file about strut mounts noises on Audi Q7, how to verify their state and replace them.
Finally, the last basic reason of metallic noise on Audi Q7. It’s because your transmission system is the origin. It is possible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then generate a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we advise that you look at this detailed guide on the sources of steering noises on Audi Q7.
Metallic noise Audi Q7 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you discern an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. Indeed, it is conceivable that either the catalyst or the silencer may be the reason of this noise. To be certain, go under the car, cold, and knock each of the previously stated parts with a hammer to define the origin of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider changing it, as well as the silencer. In this case, to eliminate the metallic noise on your Audi Q7, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is conceivable that with wear they are at the origin of your metallic noises on your Audi Q7. Go a little further up in the content page where you will find information of the solution already exposed for the front part of the car.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
