Do you perceive a metallic noise on your Acura TSX when you drive? We understand that this is not relaxing and that you have questions. Discovering such a noise is not always a good indication, but it may also be nothing serious. To help you fix this issue, our team has decided to produce this content to assist you in this investigation. In order to conduct this research as effectively as possible, we will first have a look at the conceivable sources of metallic noise in the front of your automobile, and then, if the metallic noise comes from the rear of your automobile.
Metal noise Acura TSX coming from the front end of the automobile
I listen to a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely causes of metal noise manifestations on your Acura TSX, may be that one of your bearing is tired, it will frequently make a loud noise that increases when stressed (turns faster and faster). So bear in mind to verify by taking speed (neutral gear and window open to give consideration only to noise of the wheels) that the noise is well established here, if this is the case replace it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this guide on loud noise on Acura TSX, you will most likely find a remedy to your issue.
If you discern a metalic noise on Acura TSX and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will generate a strong metallic rubbing noise that you will inevitably feel. To verify this, put your automobile on safety stand, and verify the state of your discs and pads by taking out the wheel. If they are involved, replace them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your automobile, and you want explications about it, examine this article for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you listen to a metallic noise on your Acura TSX, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To verify this, position yourself under your automobile, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we recommend that you browse this content for a complete guide about steering noises on Acura TSX.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Acura TSX. Once screwed up, they will no longer fulfill their purpose as shock absorbers and, with each impact, or violent acceleration, a noise will occur. Therefore, take into account to verify their status and replace them if required. Feel free to read this content which is a complete file about strut mounts noises on Acura TSX, how to verify their state and change them.
Finally, the last common trigger of metallic noise on Acura TSX. It’s because your transmission system is the origin. It is possible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then make a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we recommend that you read this detailed guide on the sources of steering noises on Acura TSX.
Metallic noise Acura TSX coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you are subject to an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. Indeed, it is conceivable that either the catalyst or the silencer may be the trigger of this sound. To be sure, go under the automobile, cold, and knock each of the previously stated components with a hammer to establish the origin of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on replacing it, as well as the silencer. In cases like this, to stop the metallic noise on your Acura TSX, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your automobile, it is conceivable that with wear they are at the origin of your metallic noises on your Acura TSX. Go a little further up in the content page where you will find information of the solution already exposed for the front part of the automobile.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
