On occasion your automobile can produce noises in the front right, you are very rarely reassured by this sorts of noise and you instantly begin to presume that you will loose a wheel or that the repair will cost you an astronomical sum. Thus, what if you discern a noise coming from the front right of your Lancia Ypsilon? It may not be much and you can correct the problem yourself, but if in doubt it is better to verify before a larger failure takes place. It is with this in mind that we have chosen to make this document and allow you to find out the problem and find a treatment. We will, through different steps review all the elements that can create noises at the front right of your Lancia Ypsilon. 
What are the components that can provoke front right noise Lancia Ypsilon?
Most of our article will focus on finding the element that gives your Lancia Ypsilon front wheel noise. The following is a list of the parts that are most likely to be generating it and how to verify it.
Grinding noise front right wheel Lancia Ypsilon : the shock absorber cup
One of the most classic reason of symptoms on your Lancia Ypsilon front right wheel noise is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer fulfils its purpose and during small jolts that compress the suspension systems. To verify if this is the problem that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front right as you pass over holes. If these are the cups, consider replacing them quickly as this may affect other components and necessitate more expensive repairs.
Noise while turning front right Lancia Ypsilon : stabilizer bar
If you recognise a noise when turning on your front right wheel Lancia Ypsilon at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the elements of your stabilizer bar that is malfunctioning. To verify the source of the problem, you may feel a lack of stability in the direction of the car (it pulls to the right or it pulls to the right). Also, you can position yourself on the right side of your front wheels and try to shake your wheel powerfully, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front right noise when turning Lancia Ypsilon : direction triangles
Finally, you may have a noise in the front right wheel on your Lancia Ypsilon, when you accelerate, brake or at any other random moment. It is likely that the reason of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also verify the state of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your technician.
Loud knocking or grinding noise front right Lancia Ypsilon : bearings
One of the other probable causes of symptoms of the front right grinding or knocking noise on your Lancia Ypsilon, may be that one of your bearging is tired, it will start to make a thumping noise that raises when it is under stress (turns faster and faster). So make sure you verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them quickly. If, on the other hand, this noise only happens with an engaged speed, refer to our article on loud noises on Lancia Ypsilon, you will certainly find a fix to your problem.
Front right wheel noise squeaking Lancia Ypsilon : cardan shaft
One of the most common causes when noise happens on the front right of your Lancia Ypsilon when you turn with your car is in connection with the direction of your car. Indeed, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Lancia Ypsilon, do not hesitate to consult this article to find the solution to your problem.
