In some cases your vehicle can make noises in the front axle, you are very almost never reassured by this types of noise and you right away tend to think that you will lose a wheel or that the fix will cost you an massive sum. Thus, what if you identify a noise coming from the front end of your Infiniti QX50? It may not be much and you can fix the problem yourself, but if in doubt it is better to examine before a larger damage takes place. It is with this in mind that we have decided to make this document and allow you to find out the problem and find a solution. We will, through some steps review all the components that can create noises at the front end of your Infiniti QX50. front-axle-noise-infiniti-qx50

What are the elements that can cause front axle noise Infiniti QX50?

Most of our article will focus on finding the element that gives your Infiniti QX50 front wheel noise. The following is a list of the components that are most likely to be creating it and how to verify it.

Noise vibration front end Infiniti QX50 : the shock absorber cup

One of the most likely causes of symptoms on your Infiniti QX50 front axle noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To examine if this is the problem that worries you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, consider replacing them quickly as this may damage other parts and require more costly repairs.

Noise while turning front end Infiniti QX50 : stabilizer bar

If you recognise of a noise on your Infiniti QX50 at the level of the front end when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is malfunctioning. To verify the origin of the problem, you may feel a lack of stability in the direction of the vehicle (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.

Front axle noise when turning Infiniti QX50 : direction triangles

Finally, you may have a noise in the front wheel on your Infiniti QX50, when you accelerate, brake or in a rather random but regular way. It is likely that the reason of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also examine the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto technician.

Loud noise front end Infiniti QX50 : bearings

One of the other probable causes of symptoms of the front axle of your Infiniti QX50, may be that one of your rollings is tired, it will tend to make a thumping noise that raises when it is under stress (turns faster and faster). So don’t forget to examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only shows up with an engaged speed, consult our article on loud noise on Infiniti QX50, you will probably find a response to your problem.

Front end noise squeaking Infiniti QX50 : cardan shaft

One of the most common causes when noise shows up on the front axle of your Infiniti QX50 when you turn with your vehicle is in connection with the direction of your vehicle. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Infiniti QX50, do not hesitate to consult this article to find the solution to your problem.