On occasion your car can make sounds in the front right, you are very almost never reassured by this types of noise and you automatically start to think that you will loose a wheel or that the fix will cost you an huge sum. Thus, what if you detect a noise coming from the front right of your Hyundai Ix20? It may not be much and you can correct the problem yourself, but if in doubt it is better to check before a larger damage occurs. It is with this in mind that we have chosen to write this document and allow you to find out the problem and find a treatment. We will, through different steps review all the elements that can generate noises at the front right of your Hyundai Ix20. 
What are the parts that can provoke front right noise Hyundai Ix20?
Most of our article will focus on finding the part that gives your Hyundai Ix20 front wheel noise. The following is a list of the components that are most likely to be creating it and how to confirm it.
Grinding noise front right wheel Hyundai Ix20 : the shock absorber cup
One of the most common reason of symptoms on your Hyundai Ix20 front right wheel noise is advanced wear and tear on your suspension device. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its job and during small jolts that compress the suspension systems. To check if this is the problem that concerns you, take a dented, slow-speed road and focus on the noise coming from your front right as you pass over holes. If these are the cups, consider swapping them soon as this may damage other parts and require more pricey repairs.
Noise while turning front right Hyundai Ix20 : stabilizer bar
If you recognise a noise when turning on your front right wheel Hyundai Ix20 at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely connected to one of the elements of your stabilizer bar that is faulty. To confirm the origin of the problem, you may experience a lack of balance in the direction of the automobile (it pulls to the right or it pulls to the right). Additionally, you can put yourself on the right side of your front wheels and try to shake your wheel powerfully, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Front right noise when turning Hyundai Ix20 : direction triangles
Finally, you may have a noise in the front right wheel on your Hyundai Ix20, when you accelerate, brake or at any other random moment. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the state of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto technician.
Loud knocking or grinding noise front right Hyundai Ix20 : bearings
One of the other probable origins of symptoms of the front right grinding or knocking noise on your Hyundai Ix20, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So remember to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them soon. If, on the other hand, this noise only shows up with an engaged speed, refer to our article on loud noises on Hyundai Ix20, you will surely find a solution to your problem.
Front right wheel noise squeaking Hyundai Ix20 : cardan shaft
One of the most common causes when noise shows up on the front right of your Hyundai Ix20 when you turn with your automobile is connected to the direction of your automobile. In fact, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Hyundai Ix20, do not hesitate to consult this article to find the solution to your problem.
