Occasionally your vehicle can generate sounds in the front right, you are very rarely reassured by this kind of noise and you directly start to think that you will loose a wheel or that the fix will cost you an huge sum. Then, what if you identify a noise coming from the front right of your Honda E? It may not be much and you can resolve the problem yourself, but if in doubt it is better to examine before a larger troubles takes place. It is with this in mind that we have decided to make this document and allow you to find out the problem and find a treatment. We will, through different steps review all the elements that can produce noises at the front right of your Honda E. 
What are the elements that can create front right noise Honda E?
Most of our work will focus on finding the part that gives your Honda E front wheel noise. The following is a list of the parts that are most likely to be producing it and how to verify it.
Grinding noise front right wheel Honda E : the shock absorber cup
One of the most classic reason of symptoms on your Honda E front right wheel noise is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To examine if this is the problem that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front right as you pass over holes. If these are the cups, think about replacing them soon as this may affect other components and require more expensive repairs.
Noise while turning front right Honda E : stabilizer bar
If you detect a noise when turning on your front right wheel Honda E at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely related to one of the composents of your stabilizer bar that is malfunctioning. To verify the source of the problem, you may find a lack of balance in the direction of the automobile (it pulls to the right or it pulls to the right). In addition, you can position yourself on the right side of your front wheels and try to shake your wheel vigorously, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front right noise when turning Honda E : direction triangles
Finally, you may have a noise in the front right wheel on your Honda E, when you increase the speed of, brake or at any other random moment. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also examine the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your technician.
Loud knocking or grinding noise front right Honda E : bearings
One of the other likely causes of symptoms of the front right grinding or knocking noise on your Honda E, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So remember to examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them soon. If, on the other hand, this noise only appears with an engaged speed, refer to our article on loud noises on Honda E, you will probably find a fix to your problem.
Front right wheel noise squeaking Honda E : cardan shaft
One of the most common causes when noise appears on the front right of your Honda E when you turn with your automobile is linked to the direction of your automobile. Certainly, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Honda E, do not hesitate to consult this article to find the solution to your problem.
