Sometimes your car can produce noises in the front right, you are very hardly ever reassured by this sort of noise and you directly start to think that you will loose a wheel or that the fix will cost you an astronomical sum. So, what if you recognize a noise coming from the front right of your Honda Accord? It may not be much and you can fix the issue yourself, but if in doubt it is better to check before a larger troubles takes place. It is with this in mind that we have decided to write this article and allow you to discover the issue and find a treatment. We will, through several steps review all the elements that can produce noises at the front right of your Honda Accord. 
What are the elements that can cause front right noise Honda Accord?
Most of our job will focus on finding the component that gives your Honda Accord front wheel noise. The following is a list of the elements that are most likely to be generating it and how to validate it.
Grinding noise front right wheel Honda Accord : the shock absorber cup
One of the most likely reason of symptoms on your Honda Accord front right wheel noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To check if this is the issue that worries you, take a dented, slow-speed road and listen to the noise coming from your front right as you pass over holes. If these are the cups, consider swapping them as soon as possible as this may affect other components and require more expensive repairs.
Noise while turning front right Honda Accord : stabilizer bar
If you recognise a noise when turning on your front right wheel Honda Accord at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely related to one of the composents of your stabilizer bar that is malfunctioning. To validate the source of the issue, you may experience a lack of balance in the direction of the vehicle (it pulls to the right or it pulls to the right). Additionally, you can position yourself on the right side of your front wheels and try to shake your wheel powerfully, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Front right noise when turning Honda Accord : direction triangles
Finally, you may have a noise in the front right wheel on your Honda Accord, when you are accelerating, brake or at any other random moment. It is likely that the reason of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your technician.
Loud knocking or grinding noise front right Honda Accord : bearings
One of the other likely causes of symptoms of the front right grinding or knocking noise on your Honda Accord, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure you check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them as soon as possible. If, on the other hand, this noise only appears with an engaged speed, refer to our article on loud noises on Honda Accord, you will certainly find an answer to your issue.
Front right wheel noise squeaking Honda Accord : cardan shaft
One of the most traditional causes when noise appears on the front right of your Honda Accord when you turn with your vehicle is related to the direction of your vehicle. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Honda Accord, do not hesitate to consult this article to find the solution to your problem.
