If you too have already feel a grinding noise on Volkswagen Fox, you must have asked yourself the same questions as all Volkswagen Fox owners. We are rarely reassured when a grinding noise comes out on our automobile. As we are conscious of your fears and questions, we have decided to produce this content page to be able to support you in and facilitate your quest for a solution to your problem. To do this, first we will see what the origins of a grinding noise on Volkswagen Fox are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Volkswagen Fox that comes from the shock absorbers and to finish from one of your doors.grinding-noise-volkswagen-fox

I listen a grinding noise on Volkswagen Fox when I turn the wheel

First, we will look at the grinding noises on Volkswagen Fox that happen when ever you turn the wheel of your automobile. Here are the main explanations for this:

  • Hydraulic system

    • If you hear grinding noises on your Volkswagen Fox when you turn the wheels, it may be connected to the hydraulic system of your automobile that allows you to operate the entire power steering part. In such a case, the main point to verify is the power steering fluid level, which if below the normal level could be a sign of a leak of the device. In this case, bear in mind to redo the level and verify it frequently. If the problem persists, go to your motor mechanic.

  • Bearings

    • “A grinding noise on Volkswagen Fox when I turn the wheels of my automobile” can also result from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can produce sounds close to a grinding if they are worn. Bear in mind to verify their condition.

  • Steering pump

    • Finally, a grinding noise on Volkswagen Fox when I turn may be associated with a tired steering pump power steering pump. The goal of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may arise between it and the belt. Keep in mind to verify that it is working properly.

    If despite these different solutions you continue to hear a grinding noise on Volkswagen Fox when turning your steering wheel, we have created a complete article content on this subject that can help you locate the origin.

    I acknowledge a grinding noise on Volkswagen Fox when braking

    If you listen a grinding noise from the brakes of your Volkswagen Fox, it is highly conceivable that it will be linked with brake pads at the end of their life, in fact, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Take off the wheels in question and verify the wear indicator on them. If they are dead they will have to be swapped almost instantly because they will almost instantly damage your discs.
    If, despite crontrol, your grinding noise on Volkswagen Fox does come from your brakes but is not connected to the pads, verify this article content to find out the other conceivable origins of brake noises on Volkswagen Fox.

    I listen a grinding noise on Volkswagen Fox at the shock absorbers

    If you are in the scenario where you discover the grinding noise on Volkswagen Fox as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several explanations that can justify this noise. Indeed, you will have to verify some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would trigger an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Volkswagen Fox

    at each compression.
    Once you have tested all these points, you should have found the origin of your problem, go to your auto mechanic to fix the defective component. If you have not located the origin of your problem, we recommend highly that you take a look at this article content which discusses all possible origins of shock absorber noise on Volkswagen Fox.

    I listen a grinding noise on Volkswagen Fox at a door

    If that’s not enough, don’t hesitate to look at this full article content on door sounds on Volkswagen Fox.
    It is conceivable, depending on the type of noise you note, that the hinge of your door is at the origin of these noises. If this is the case, you will have to check it by opening your door and checking out that the grinding noise on your Volkswagen Fox comes from a hinge that is too dry. To resolve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to read this complete article content on door sounds on Volkswagen Fox.