If you too have already hear a grinding noise on Toyota Yaris 2, you must have asked yourself the same questions as all Toyota Yaris 2 owners. We are rarely reassured when a grinding noise shows up on our car. As we are conscious of your fears and questions, we have decided to compose this article to be able to support you in and facilitate your investigation for a remedy to your problem. To do this, first we will see what the origins of a grinding noise on Toyota Yaris 2 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Toyota Yaris 2 that comes from the shock absorbers and to finish from one of your doors.grinding-noise-toyota-yaris-2

I listen a grinding noise on Toyota Yaris 2 when I turn the wheel

First, we will check out the grinding noises on Toyota Yaris 2 that arise every time you turn the wheel of your car. Here are the main reasons for this:

  • Hydraulic system

    • If you discover grinding noises on your Toyota Yaris 2 when you turn the wheels, it may be related to the hydraulic system of your car that allows you to run the entire power steering part. In cases like this, the main point to check is the power steering fluid level, which if below the normal level could be an indicator of a leak of the unit. In this case, take into account to redo the level and check it regularly. If the problem lasts, go to your motor mechanic.

  • Bearings

    • “A grinding noise on Toyota Yaris 2 when I turn the wheels of my car” can also be a consequence of premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Bear in mind to check their state.

  • Steering pump

    • Finally, a grinding noise on Toyota Yaris 2 when I turn may be linked to a tired steering pump power steering pump. The task of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may show up between it and the belt. Bear in mind to check that it is working properly.

    If despite these different possibilities you continue to experience a grinding noise on Toyota Yaris 2 when turning your steering wheel, we have created a complete article on this subject that can help you find the origin.

    I acknowledge a grinding noise on Toyota Yaris 2 when braking

    If you listen a grinding noise from the brakes of your Toyota Yaris 2, it is highly possible that it will be connected to brake pads at the end of their life, in fact, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Take out the wheels in question and check the wear indicator on them. If they are dead they will have to be swapped quickly because they will quickly damage your discs.
    If, despite crontrol, your grinding noise on Toyota Yaris 2 does come from your brakes but is not related to the pads, check this content page to find out the other plausible sources of brake noises on Toyota Yaris 2.

    I listen a grinding noise on Toyota Yaris 2 at the shock absorbers

    If you are in the situation where you discover the grinding noise on Toyota Yaris 2 as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several reasons that can justify this noise. In fact, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Toyota Yaris 2

    at each compression.
    Once you have inspected all these points, you should have found the origin of your problem, go to your auto mechanic to fix the defective part. If you have not discovered the origin of your problem, we encourage that you take a look at this content page which discusses all possible origins of shock absorber noise on Toyota Yaris 2.

    I listen a grinding noise on Toyota Yaris 2 at a door

    If that’s not enough, don’t hesitate to look at this complete content page on door sounds on Toyota Yaris 2.
    It is plausible, depending on the type of noise you acknowledge, that the hinge of your door is at the origin of these noises. If this is the case, you will have to check it by opening your door and checking that the grinding noise on your Toyota Yaris 2 comes from a hinge that is too dry. To resolve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to have a look at this complete content page on door sounds on Toyota Yaris 2.