If you too have already notice a grinding noise on Toyota Rav 4, you must have wondering the same questions as all Toyota Rav 4 owners. We are rarely reassured when a grinding noise arises on our car. As we are conscious of your uncertainties and questions, we have made a decision to write this content in order to support you in and ease your investigation for a remedy to your problem. To do this, first we will see what the sources of a grinding noise on Toyota Rav 4 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Toyota Rav 4 that comes from the shock absorbers and to finish from one of your doors.grinding-noise-toyota-rav-4

I perceive a grinding noise on Toyota Rav 4 when ever I turn the wheel

First, we will take a look at the grinding noises on Toyota Rav 4 that appear once you turn the wheel of your car. Here are the main causes for this:

  • Hydraulic system

    • If you hear grinding noises on your Toyota Rav 4 when ever you turn the wheels, it may be related to the hydraulic system of your car that allows you to operate the entire power steering part. In such a case, the main point to verify is the power steering fluid level, which if below the normal level could be an indication of a leak of the device. In this case, remember to redo the level and verify it regularly. If the problem persists, go to your motor mechanic.

  • Bearings

    • “A grinding noise on Toyota Rav 4 when ever I turn the wheels of my car” can also result from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Remember to verify their condition.

  • Steering pump

    • Finally, a grinding noise on Toyota Rav 4 when ever I turn may be associated with a tired steering pump power steering pump. The goal of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may emerge between it and the belt. Remember to verify that it is working properly.

    If despite these different solutions you continue to encounter a grinding noise on Toyota Rav 4 when turning your steering wheel, we have created a complete content on this subject that can help you discover the origin.

    I notice a grinding noise on Toyota Rav 4 when ever braking

    If you perceive a grinding noise from the brakes of your Toyota Rav 4, it is highly possible that it will be related to brake pads at the end of their life, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Remove the wheels in question and verify the wear indicator on them. If they are dead they will have to be swapped promptly because they will promptly damage your discs.
    If, despite verification, your grinding noise on Toyota Rav 4 does come from your brakes but is not related to the pads, verify this content to find out the other possible sources of brake noises on Toyota Rav 4.

    I perceive a grinding noise on Toyota Rav 4 at the shock absorbers

    If you are in the situation where you recognize the grinding noise on Toyota Rav 4 as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply when ever you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several causes that can justify this noise. In fact, you will have to verify some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would trigger an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Toyota Rav 4

    at each compression.
    Once you have inspected all these elements, you should have found the origin of your trouble, go to your auto mechanic to repair the faulty part. If you have not found the origin of your problem, we recommend that you take a look at this content which discusses all possible origins of shock absorber noise on Toyota Rav 4.

    I perceive a grinding noise on Toyota Rav 4 at a door

    If that’s not enough, don’t hesitate to look at this complete content on door sounds on Toyota Rav 4.
    It is possible, determined by the type of noise you note, that the hinge of your door is at the origin of these noises. If this is the case, you will have to examine it by opening your door and checking out that the grinding noise on your Toyota Rav 4 comes from a hinge that is too dry. To solve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to have a look at this complete content on door sounds on Toyota Rav 4.