If you too have already experienced a grinding noise on Toyota Auris, you must have wondering the same questions as all Toyota Auris owners. We are rarely reassured when a grinding noise appears on our automobile. As we are conscious of your uncertainties and questions, we have decided to write this content in order to support you in and facilitate your investigation for a remedy to your problem. To do this, first we will see what the origins of a grinding noise on Toyota Auris are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Toyota Auris that comes from the shock absorbers and to finish from one of your doors.grinding-noise-toyota-auris

I hear a grinding noise on Toyota Auris every time I turn the wheel

First, we will look into the grinding noises on Toyota Auris that appear every time you turn the wheel of your automobile. Here are the main reasons for this:

  • Hydraulic system
  • If you are subject to grinding noises on your Toyota Auris every time you turn the wheels, it may be connected to the hydraulic system of your automobile that allows you to operate the entire power steering part. In this case, the main point to check is the power steering fluid level, which if below the normal level could be an indicator of a leak of the system. In this case, bear in mind to redo the level and check it regularly. If the problem is persistant, go to your technician.

  • Bearings
  • “A grinding noise on Toyota Auris every time I turn the wheels of my automobile” can also result from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Bear in mind to check their state.

  • Steering pump
  • Finally, a grinding noise on Toyota Auris every time I turn may be linked to a tired steering pump power steering pump. The mission of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may appear between it and the belt. Please remember to check that it is working properly.

    If despite these different possibilities you continue to encounter a grinding noise on Toyota Auris when turning your steering wheel, we have created a complete article content on this subject that can support you find the origin.

    I notice a grinding noise on Toyota Auris every time braking

    If you hear a grinding noise from the brakes of your Toyota Auris, it is highly conceivable that it will be linked with brake pads at the end of their life, indeed, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead they will have to be changed almost instantly because they will almost instantly damage your discs.
    If, despite crontrol, your grinding noise on Toyota Auris does come from your brakes but is not connected to the pads, check this article content to find out the other possible origins of brake noises on Toyota Auris.

    I hear a grinding noise on Toyota Auris at the shock absorbers

    If you are in the scenario where you detect the grinding noise on Toyota Auris as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply every time you change direction and the vehicle’s mass is swung from one side to the other. In this instance, there are several reasons that can justify this noise. In fact, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will generate a grinding noise on Toyota Auris

    at each compression.
    Once you have tested all these areas, you should have found the origin of your issue, go to your mechanic to repair the malfunctioning component. If you have not located the origin of your problem, we suggest that you have a look at this article content which discusses all possible origins of shock absorber noise on Toyota Auris.

    I hear a grinding noise on Toyota Auris at a door

    If that’s not enough, don’t hesitate to read this complete article content on door sounds on Toyota Auris.
    It is possible, determined by the kind of of noise you know, that the hinge of your door is at the source of these noises. If this is the case, you will have to verify it by opening your door and verifying that the grinding noise on your Toyota Auris comes from a hinge that is too dry. To resolve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to have a look at this complete article content on door sounds on Toyota Auris.