If you too have already hear a grinding noise on Suzuki Swift, you must have asked yourself the same questions as all Suzuki Swift owners. We are rarely reassured when a grinding noise arises on our vehicle. As we are conscious of your doubts and questions, we have made a decision to compose this content in order to assist you in and facilitate your investigation for a answer to your issue. To do this, first we will see what the sources of a grinding noise on Suzuki Swift are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Suzuki Swift that comes from the shock absorbers and to finish from one of your doors.grinding-noise-suzuki-swift

I experience a grinding noise on Suzuki Swift every time I turn the wheel

First, we will have a look at the grinding noises on Suzuki Swift that arise every time you turn the wheel of your vehicle. Here are the main causes for this:

  • Hydraulic system
  • If you are subject to grinding noises on your Suzuki Swift every time you turn the wheels, it may be linked to the hydraulic system of your vehicle that allows you to run the entire power steering part. In such a case, the main point to examine is the power steering fluid level, which if below the normal level could be an indicator of a leak of the device. In this case, take into account to redo the level and examine it frequently. If the issue remains, go to your mechanic.

  • Bearings
  • “A grinding noise on Suzuki Swift every time I turn the wheels of my vehicle” can also be a consequence of premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can produce sounds close to a grinding if they are worn. Take into account to examine their state.

  • Steering pump
  • Finally, a grinding noise on Suzuki Swift every time I turn may be associated with a tired steering pump power steering pump. The goal of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may occur between it and the belt. Consider to examine that it is working properly.

    If despite these different possibilities you continue to notice a grinding noise on Suzuki Swift when turning your steering wheel, we have wrote a complete article content on this subject that can help you find the origin.

    I listen to a grinding noise on Suzuki Swift every time braking

    If you experience a grinding noise from the brakes of your Suzuki Swift, it is highly conceivable that it will be linked to brake pads at the end of their life, actually, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Remove the wheels in question and examine the wear indicator on them. If they are dead they will have to be swapped as soon as possible because they will as soon as possible damage your discs.
    If, despite check, your grinding noise on Suzuki Swift does come from your brakes but is not linked to the pads, examine this article content to find out the other conceivable sources of brake noises on Suzuki Swift.

    I experience a grinding noise on Suzuki Swift at the shock absorbers

    If you are in the scenario where you discern the grinding noise on Suzuki Swift as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply every time you change direction and the vehicle’s mass is swung from one side to the other. In this case, there are several causes that can justify this noise. In fact, you will have to examine some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would result in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Suzuki Swift

    at each compression.
    Once you have checked all these elements, you should have found the source of your problem, go to your technician to fix the defective component. If you have not located the source of your issue, we recommend highly that you look at this article content which discusses all possible origins of shock absorber noise on Suzuki Swift.

    I experience a grinding noise on Suzuki Swift at a door

    If that’s not enough, don’t hesitate to check out this complete article content on door sounds on Suzuki Swift.
    It is conceivable, determined by the kind of of noise you acknowledge, that the hinge of your door is at the source of these noises. If this is the case, you will have to check it by opening your door and examining that the grinding noise on your Suzuki Swift comes from a hinge that is too dry. To correct this issue, first try to grease the hinge, in most cases this is enough to solve your issue. If that’s not enough, don’t hesitate to have a look at this complete article content on door sounds on Suzuki Swift.