If you too have already feel a grinding noise on Suzuki Alto, you must have asked yourself the same questions as all Suzuki Alto owners. We are rarely reassured when a grinding noise happens on our automobile. As we are conscious of your uncertainties and questions, we have made a decision to produce this article content to be able to support you in and facilitate your investigation for a remedy to your problem. To do this, first we will see what the sources of a grinding noise on Suzuki Alto are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Suzuki Alto that originates from the shock absorbers and to finish from one of your doors.
I hear a grinding noise on Suzuki Alto each time I turn the wheel
First, we will have a look at the grinding noises on Suzuki Alto that appear when you turn the wheel of your automobile. Here are the main reasons for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
- You may experience abnormal wear and tear on one of the seals. This would end in an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will generate a grinding noise on Suzuki Alto
If you feel grinding noises on your Suzuki Alto each time you turn the wheels, it may be relating to the hydraulic system of your automobile that allows you to run the entire power steering part. In such a case, the main point to check is the power steering fluid level, which if below the normal level could be an indication of a leak of the device. In this case, remember to redo the level and check it frequently. If the problem is persistant, go to your mechanic.
“A grinding noise on Suzuki Alto each time I turn the wheels of my automobile” can also originate from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can produce sounds close to a grinding if they are worn. Bear in mind to check their state.
Finally, a grinding noise on Suzuki Alto each time I turn may be associated with a tired steering pump power steering pump. The mission of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may occur between it and the belt. Take into account to check that it is working properly.
If despite these different possibilities you continue to encounter a grinding noise on Suzuki Alto when turning your steering wheel, we have created a complete content page on this subject that can support you find the origin.
I experience a grinding noise on Suzuki Alto each time braking
If you hear a grinding noise from the brakes of your Suzuki Alto, it is highly imaginable that it will be linked with brake pads at the end of their life, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take off the wheels in question and check the wear indicator on them. If they are dead they will have to be changed fairly quickly because they will fairly quickly damage your discs.
If, despite verification, your grinding noise on Suzuki Alto does come from your brakes but is not relating to the pads, check this content page to find out the other possible sources of brake noises on Suzuki Alto.
I hear a grinding noise on Suzuki Alto at the shock absorbers
If you are in the scenario where you discover the grinding noise on Suzuki Alto as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply each time you change direction and the vehicle’s mass is swung from one side to the other. In this instance, there are several reasons that can explain this noise. Indeed, you will have to check some points, here they are:
at each compression.
Once you have examined all these points, you should have found the origin of your problem, go to your auto mechanic to fix the faulty component. If you have not found the origin of your problem, we advise that you look at this content page which discusses all possible origins of shock absorber noise on Suzuki Alto.
I hear a grinding noise on Suzuki Alto at a door
If that’s not enough, don’t hesitate to look at this complete content page on door sounds on Suzuki Alto.
It is possible, depending on the kind of of noise you know, that the hinge of your door is at the source of these noises. If this is the case, you will have to examine it by opening your door and checking out that
