If you too have already notice a grinding noise on Ram P/U, you must have asked yourself the same questions as all Ram P/U owners. We are rarely reassured when a grinding noise appears on our automobile. As we are conscious of your uncertainties and questions, we have made a decision to prepare this article in order to assist you in and facilitate your investigation for a answer to your problem. To do this, first we will see what the sources of a grinding noise on Ram P/U are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Ram P/U that comes from the shock absorbers and to finish from one of your doors.grinding-noise-ram-p/u

I listen a grinding noise on Ram P/U once I turn the wheel

First, we will look into the grinding noises on Ram P/U that take place once you turn the wheel of your automobile. Here are the main explanations for this:

  • Hydraulic system

    • If you feel grinding noises on your Ram P/U once you turn the wheels, it may be connected to the hydraulic system of your automobile that allows you to run the entire power steering part. In this case, the main point to examine is the power steering fluid level, which if below the normal level could be a sign of a leak of the device. In this case, take into account to redo the level and examine it regularly. If the problem continues, go to your auto technician.

  • Bearings

    • “A grinding noise on Ram P/U once I turn the wheels of my automobile” can also be a consequence of premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Bear in mind to examine their state.

  • Steering pump

    • Finally, a grinding noise on Ram P/U once I turn may be connected to a tired steering pump power steering pump. The task of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may arise between it and the belt. Please remember to examine that it is working properly.

    If despite these different solutions you continue to notice a grinding noise on Ram P/U when turning your steering wheel, we have produced a complete content on this subject that can support you discover the origin.

    I listen a grinding noise on Ram P/U once braking

    If you listen a grinding noise from the brakes of your Ram P/U, it is highly conceivable that it will be caused by brake pads at the end of their life, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take off the wheels in question and examine the wear indicator on them. If they are dead they will have to be replaced almost instantly because they will almost instantly damage your discs.
    If, despite check, your grinding noise on Ram P/U does come from your brakes but is not connected to the pads, examine this article content to find out the other conceivable sources of brake noises on Ram P/U.

    I listen a grinding noise on Ram P/U at the shock absorbers

    If you are in the situation where you discern the grinding noise on Ram P/U as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply once you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several explanations that can justify this noise. Indeed, you will have to examine some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would trigger an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Ram P/U

    at each compression.
    Once you have tested all these points, you should have found the origin of your issue, go to your technician to repair the faulty component. If you have not identified the origin of your problem, we encourage that you take a look at this article content which discusses all possible origins of shock absorber noise on Ram P/U.

    I listen a grinding noise on Ram P/U at a door

    If that’s not enough, don’t hesitate to check out this full article content on door sounds on Ram P/U.
    It is conceivable, determined by the type of noise you acknowledge, that the hinge of your door is at the origin of these noises. If this is the case, you will have to check it by opening your door and examining that the grinding noise on your Ram P/U comes from a hinge that is too dry. To correct this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to take a look at this complete article content on door sounds on Ram P/U.