If you too have already notice a grinding noise on Peugeot Rifter, you must have wondering the same questions as all Peugeot Rifter owners. We are rarely reassured when a grinding noise arises on our vehicle. As we are conscious of your uncertainties and questions, we have chosen to prepare this content to be able to support you in and facilitate your quest for a answer to your trouble. To do this, first we will see what the origins of a grinding noise on Peugeot Rifter are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Peugeot Rifter that originates from the shock absorbers and to finish from one of your doors.grinding-noise-peugeot-rifter

I experience a grinding noise on Peugeot Rifter every time I turn the wheel

First, we will look into the grinding noises on Peugeot Rifter that arise when ever you turn the wheel of your vehicle. Here are the main reasons for this:

  • Hydraulic system

    • If you notice grinding noises on your Peugeot Rifter every time you turn the wheels, it may be related to the hydraulic system of your vehicle that allows you to operate the entire power steering part. In cases like this, the main point to verify is the power steering fluid level, which if below the normal level could be an indication of a leak of the unit. In this case, take into account to redo the level and verify it frequently. If the trouble persists, go to your technician.

  • Bearings

    • “A grinding noise on Peugeot Rifter every time I turn the wheels of my vehicle” can also originate from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can produce sounds close to a grinding if they are worn. Remember to verify their state.

  • Steering pump

    • Finally, a grinding noise on Peugeot Rifter every time I turn may be linked to a tired steering pump power steering pump. The objective of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may emerge between it and the belt. Keep in mind to verify that it is working properly.

    If despite these different solutions you continue to notice a grinding noise on Peugeot Rifter when turning your steering wheel, we have produced a complete article on this subject that can help you find the origin.

    I experience a grinding noise on Peugeot Rifter every time braking

    If you experience a grinding noise from the brakes of your Peugeot Rifter, it is highly possible that it will be caused by brake pads at the end of their life, in fact, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Take out the wheels in question and verify the wear indicator on them. If they are dead they will have to be swapped as soon as possible because they will as soon as possible damage your discs.
    If, despite crontrol, your grinding noise on Peugeot Rifter does come from your brakes but is not related to the pads, verify this article to find out the other conceivable origins of brake noises on Peugeot Rifter.

    I experience a grinding noise on Peugeot Rifter at the shock absorbers

    If you are in the situation where you find the grinding noise on Peugeot Rifter as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply every time you change direction and the vehicle’s mass is swung from one side to the other. In this instance, there are several reasons that can justify this noise. Indeed, you will have to verify some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would trigger an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will generate a grinding noise on Peugeot Rifter

    at each compression.
    Once you have tested all these areas, you should have found the origin of your trouble, go to your motor mechanic to repair the malfunctioning component. If you have not located the origin of your trouble, we recommend highly that you have a look at this article which discusses all possible origins of shock absorber noise on Peugeot Rifter.

    I experience a grinding noise on Peugeot Rifter at a door

    If that’s not enough, don’t hesitate to read this full article on door sounds on Peugeot Rifter.
    It is conceivable, depending on the type of noise you experience, that the hinge of your door is at the source of these noises. If this is the case, you will have to examine it by opening your door and checking that the grinding noise on your Peugeot Rifter comes from a hinge that is too dry. To resolve this trouble, first try to grease the hinge, in most cases this is enough to solve your trouble. If that’s not enough, don’t hesitate to take a look at this complete article on door sounds on Peugeot Rifter.