If you too have already discover a grinding noise on Peugeot e-208, you must have asked yourself the same questions as all Peugeot e-208 owners. We are rarely reassured when a grinding noise comes out on our automobile. As we are conscious of your fears and questions, we have chosen to create this article in order to support you in and ease your investigation for a solution to your problem. To do this, first we will see what the origins of a grinding noise on Peugeot e-208 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Peugeot e-208 that comes from the shock absorbers and to finish from one of your doors.grinding-noise-peugeot-e-208

I acknowledge a grinding noise on Peugeot e-208 every time I turn the wheel

First, we will have a look at the grinding noises on Peugeot e-208 that take place when you turn the wheel of your automobile. Here are the main causes for this:

  • Hydraulic system

    • If you feel grinding noises on your Peugeot e-208 every time you turn the wheels, it may be connected to the hydraulic system of your automobile that allows you to run the entire power steering part. In cases like this, the main point to verify is the power steering fluid level, which if below the normal level could be a signal of a leak of the device. In this case, keep in mind to redo the level and verify it regularly. If the problem remains, go to your auto mechanic.

  • Bearings

    • “A grinding noise on Peugeot e-208 every time I turn the wheels of my automobile” can also originate from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can produce sounds close to a grinding if they are worn. Take into account to verify their condition.

  • Steering pump

    • Finally, a grinding noise on Peugeot e-208 every time I turn may be linked to a tired steering pump power steering pump. The objective of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may show up between it and the belt. Bear in mind to verify that it is working properly.

    If despite these different possibilities you continue to hear a grinding noise on Peugeot e-208 when turning your steering wheel, we have created a complete content on this subject that can help you find the origin.

    I notice a grinding noise on Peugeot e-208 every time braking

    If you acknowledge a grinding noise from the brakes of your Peugeot e-208, it is highly conceivable that it will be associated with brake pads at the end of their life, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take out the wheels in question and verify the wear indicator on them. If they are dead they will have to be replaced almost instantly because they will almost instantly damage your discs.
    If, despite crontrol, your grinding noise on Peugeot e-208 does come from your brakes but is not connected to the pads, verify this article content to find out the other plausible sources of brake noises on Peugeot e-208.

    I acknowledge a grinding noise on Peugeot e-208 at the shock absorbers

    If you are in the scenario where you discover the grinding noise on Peugeot e-208 as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply every time you change direction and the vehicle’s mass is swung from one side to the other. In this case, there are several causes that can justify this noise. In fact, you will have to verify some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Peugeot e-208

    at each compression.
    Once you have inspected all these areas, you should have found the origin of your problem, go to your auto mechanic to repair the malfunctioning component. If you have not found the origin of your problem, we advise that you take a look at this article content which discusses all possible origins of shock absorber noise on Peugeot e-208.

    I acknowledge a grinding noise on Peugeot e-208 at a door

    If that’s not enough, don’t hesitate to read this full article content on door sounds on Peugeot e-208.
    It is plausible, according to the type of noise you acknowledge, that the hinge of your door is at the origin of these noises. If this is the case, you will have to verify it by opening your door and examining that the grinding noise on your Peugeot e-208 comes from a hinge that is too dry. To resolve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to have a look at this complete article content on door sounds on Peugeot e-208.