If you too have already hear a grinding noise on Peugeot 806, you must have asked yourself the same questions as all Peugeot 806 owners. We are rarely reassured when a grinding noise happens on our car. As we are conscious of your doubts and questions, we have decided to compose this content page in order to support you in and ease your quest for a solution to your issue. To do this, first we will see what the sources of a grinding noise on Peugeot 806 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Peugeot 806 that comes from the shock absorbers and to finish from one of your doors.
I perceive a grinding noise on Peugeot 806 each time I turn the wheel
First, we will look at the grinding noises on Peugeot 806 that take place when you turn the wheel of your car. Here are the main reasons for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
- You may encounter abnormal wear and tear on one of the seals. This would cause an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will generate a grinding noise on Peugeot 806
If you notice grinding noises on your Peugeot 806 each time you turn the wheels, it may be connected to the hydraulic system of your car that allows you to run the entire power steering part. In this instance, the main point to check is the power steering fluid level, which if below the normal level could be a signal of a leak of the unit. In this case, take into account to redo the level and check it regularly. If the issue persists, go to your mechanic.
“A grinding noise on Peugeot 806 each time I turn the wheels of my car” can also originate from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Bear in mind to check their state.
Finally, a grinding noise on Peugeot 806 each time I turn may be related to a tired steering pump power steering pump. The objective of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may emerge between it and the belt. Remember to check that it is working properly.
If despite these different solutions you continue to encounter a grinding noise on Peugeot 806 when turning your steering wheel, we have made a complete content page on this subject that can support you discover the origin.
I listen a grinding noise on Peugeot 806 each time braking
If you perceive a grinding noise from the brakes of your Peugeot 806, it is highly conceivable that it will be linked with brake pads at the end of their life, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead they will have to be swapped as soon as possible because they will as soon as possible damage your discs.
If, despite crontrol, your grinding noise on Peugeot 806 does come from your brakes but is not connected to the pads, check this article content to find out the other plausible origins of brake noises on Peugeot 806.
I perceive a grinding noise on Peugeot 806 at the shock absorbers
If you are in the scenario where you establish the grinding noise on Peugeot 806 as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply each time you change direction and the vehicle’s mass is swung from one side to the other. In this case, there are several reasons that can justify this noise. Indeed, you will have to check some points, here they are:
at each compression.
Once you have examined all these areas, you should have found the source of your trouble, go to your motor mechanic to fix the malfunctioning part. If you have not located the source of your issue, we advise that you take a look at this article content which discusses all possible origins of shock absorber noise on Peugeot 806.
I perceive a grinding noise on Peugeot 806 at a door
If that’s not enough, don’t hesitate to read this full article content on door sounds on Peugeot 806.
It is plausible, depending on the kind of of noise you acknowledge, that the hinge of your door is at the origin of these noises. If this is the case, you will have to check it by opening your door and checking that
