If you too have already discover a grinding noise on Peugeot 5008, you must have asked yourself the same questions as all Peugeot 5008 owners. We are rarely reassured when a grinding noise happens on our vehicle. As we are conscious of your concerns and questions, we have decided to produce this content to be able to assist you in and ease your quest for a answer to your problem. To do this, first we will see what the sources of a grinding noise on Peugeot 5008 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Peugeot 5008 that originates from the shock absorbers and to finish from one of your doors.grinding-noise-peugeot-5008

I perceive a grinding noise on Peugeot 5008 when I turn the wheel

First, we will look at the grinding noises on Peugeot 5008 that appear when you turn the wheel of your vehicle. Here are the main reasons for this:

  • Hydraulic system

    • If you discover grinding noises on your Peugeot 5008 when you turn the wheels, it may be connected to the hydraulic system of your vehicle that allows you to operate the entire power steering part. In such a case, the main point to check is the power steering fluid level, which if below the normal level could be a sign of a leak of the system. In this case, keep in mind to redo the level and check it regularly. If the problem remains, go to your motor mechanic.

  • Bearings

    • “A grinding noise on Peugeot 5008 when I turn the wheels of my vehicle” can also be a consequence of premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Take into account to check their state.

  • Steering pump

    • Finally, a grinding noise on Peugeot 5008 when I turn may be related to a tired steering pump power steering pump. The goal of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may emerge between it and the belt. Think about to check that it is working properly.

    If despite these different possibilities you continue to hear a grinding noise on Peugeot 5008 when turning your steering wheel, we have created a complete article on this subject that can support you locate the origin.

    I listen a grinding noise on Peugeot 5008 when braking

    If you perceive a grinding noise from the brakes of your Peugeot 5008, it is highly possible that it will be connected to brake pads at the end of their life, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Take off the wheels in question and check the wear indicator on them. If they are dead they will have to be replaced fairly quickly because they will fairly quickly damage your discs.
    If, despite verification, your grinding noise on Peugeot 5008 does come from your brakes but is not connected to the pads, check this article to find out the other possible sources of brake noises on Peugeot 5008.

    I perceive a grinding noise on Peugeot 5008 at the shock absorbers

    If you are in the situation where you find the grinding noise on Peugeot 5008 as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several reasons that can explain this noise. Indeed, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would cause an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will generate a grinding noise on Peugeot 5008

    at each compression.
    Once you have examined all these elements, you should have found the origin of your problem, go to your mechanic to repair the malfunctioning part. If you have not located the origin of your problem, we advise that you have a look at this article which discusses all possible origins of shock absorber noise on Peugeot 5008.

    I perceive a grinding noise on Peugeot 5008 at a door

    If that’s not enough, don’t hesitate to check out this complete article on door sounds on Peugeot 5008.
    It is possible, according to the type of noise you acknowledge, that the hinge of your door is at the source of these noises. If this is the case, you will have to examine it by opening your door and verifying that the grinding noise on your Peugeot 5008 comes from a hinge that is too dry. To fix this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to take a look at this complete article on door sounds on Peugeot 5008.