If you too have already notice a grinding noise on Mitsubishi L200, you must have asked yourself the same questions as all Mitsubishi L200 owners. We are rarely reassured when a grinding noise comes out on our vehicle. As we are conscious of your concerns and questions, we have chosen to compose this article to be able to assist you in and ease your investigation for a answer to your problem. To do this, first we will see what the sources of a grinding noise on Mitsubishi L200 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Mitsubishi L200 that originates from the shock absorbers and to finish from one of your doors.grinding-noise-mitsubishi-l200

I notice a grinding noise on Mitsubishi L200 once I turn the wheel

First, we will look into the grinding noises on Mitsubishi L200 that appear every time you turn the wheel of your vehicle. Here are the main explanations for this:

  • Hydraulic system

    • If you are subject to grinding noises on your Mitsubishi L200 once you turn the wheels, it may be related to the hydraulic system of your vehicle that allows you to operate the entire power steering part. In this case, the main point to examine is the power steering fluid level, which if below the normal level could be a sign of a leak of the system. In this case, please remember to redo the level and examine it regularly. If the problem remains, go to your motor mechanic.

  • Bearings

    • “A grinding noise on Mitsubishi L200 once I turn the wheels of my vehicle” can also be a consequence of premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Keep in mind to examine their state.

  • Steering pump

    • Finally, a grinding noise on Mitsubishi L200 once I turn may be relating to a tired steering pump power steering pump. The task of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may appear between it and the belt. Please remember to examine that it is working properly.

    If despite these different solutions you continue to notice a grinding noise on Mitsubishi L200 when turning your steering wheel, we have created a complete article on this subject that can help you find the origin.

    I listen to a grinding noise on Mitsubishi L200 once braking

    If you notice a grinding noise from the brakes of your Mitsubishi L200, it is highly imaginable that it will be linked to brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take out the wheels in question and examine the wear indicator on them. If they are dead they will have to be swapped promptly because they will promptly damage your discs.
    If, despite check, your grinding noise on Mitsubishi L200 does come from your brakes but is not related to the pads, examine this article content to find out the other plausible sources of brake noises on Mitsubishi L200.

    I notice a grinding noise on Mitsubishi L200 at the shock absorbers

    If you are in the situation where you detect the grinding noise on Mitsubishi L200 as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply once you change direction and the vehicle’s mass is swung from one side to the other. In this instance, there are several explanations that can explain this noise. Indeed, you will have to examine some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Mitsubishi L200

    at each compression.
    Once you have inspected all these points, you should have found the source of your problem, go to your technician to fix the faulty component. If you have not located the source of your problem, we would suggest that you look at this article content which discusses all possible origins of shock absorber noise on Mitsubishi L200.

    I notice a grinding noise on Mitsubishi L200 at a door

    If that’s not enough, don’t hesitate to take a look at this full article content on door sounds on Mitsubishi L200.
    It is plausible, depending on the kind of of noise you acknowledge, that the hinge of your door is at the source of these noises. If this is the case, you will have to verify it by opening your door and checking out that the grinding noise on your Mitsubishi L200 comes from a hinge that is too dry. To correct this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to have a look at this complete article content on door sounds on Mitsubishi L200.