If you too have already notice a grinding noise on Mitsubishi Asx, you must have wondering the same questions as all Mitsubishi Asx owners. We are rarely reassured when a grinding noise appears on our car. As we are conscious of your doubts and questions, we have decided to create this content page in order to support you in and facilitate your investigation for a answer to your issue. To do this, first we will see what the origins of a grinding noise on Mitsubishi Asx are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Mitsubishi Asx that comes from the shock absorbers and to finish from one of your doors.
I listen to a grinding noise on Mitsubishi Asx each time I turn the wheel
First, we will look into the grinding noises on Mitsubishi Asx that appear every time you turn the wheel of your car. Here are the main explanations for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
- You may encounter abnormal wear and tear on one of the seals. This would cause an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Mitsubishi Asx
If you hear grinding noises on your Mitsubishi Asx each time you turn the wheels, it may be linked to the hydraulic system of your car that allows you to run the entire power steering part. In this instance, the main point to verify is the power steering fluid level, which if below the normal level could be an indication of a leak of the device. In this case, take into account to redo the level and verify it regularly. If the issue lasts, go to your auto mechanic.
“A grinding noise on Mitsubishi Asx each time I turn the wheels of my car” can also be a consequence of premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Bear in mind to verify their state.
Finally, a grinding noise on Mitsubishi Asx each time I turn may be associated with a tired steering pump power steering pump. The task of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may occur between it and the belt. Remember to verify that it is working properly.
If despite these different possibilities you continue to experience a grinding noise on Mitsubishi Asx when turning your steering wheel, we have made a complete article content on this subject that can support you locate the origin.
I acknowledge a grinding noise on Mitsubishi Asx each time braking
If you listen to a grinding noise from the brakes of your Mitsubishi Asx, it is highly possible that it will be connected to brake pads at the end of their life, actually, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Remove the wheels in question and verify the wear indicator on them. If they are dead they will have to be replaced fairly quickly because they will fairly quickly damage your discs.
If, despite verification, your grinding noise on Mitsubishi Asx does come from your brakes but is not linked to the pads, verify this content to find out the other plausible sources of brake noises on Mitsubishi Asx.
I listen to a grinding noise on Mitsubishi Asx at the shock absorbers
If you are in the situation where you recognize the grinding noise on Mitsubishi Asx as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply each time you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several explanations that can explain this noise. Indeed, you will have to verify some points, here they are:
at each compression.
Once you have examined all these areas, you should have found the origin of your issue, go to your auto mechanic to fix the malfunctioning component. If you have not located the origin of your issue, we would suggest that you have a look at this content which discusses all possible origins of shock absorber noise on Mitsubishi Asx.
I listen to a grinding noise on Mitsubishi Asx at a door
If that’s not enough, don’t hesitate to read this full content on door sounds on Mitsubishi Asx.
It is plausible, according to the type of noise you acknowledge, that the hinge of your door is at the source of these noises. If this is the case, you will have to check it by opening your door and examining that
