If you too have already notice a grinding noise on Mercedes Classe V, you must have asked yourself the same questions as all Mercedes Classe V owners. We are rarely reassured when a grinding noise arises on our vehicle. As we are conscious of your fears and questions, we have decided to write this article in order to assist you in and facilitate your investigation for a answer to your trouble. To do this, first we will see what the sources of a grinding noise on Mercedes Classe V are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Mercedes Classe V that comes from the shock absorbers and to finish from one of your doors.
I perceive a grinding noise on Mercedes Classe V each time I turn the wheel
First, we will look at the grinding noises on Mercedes Classe V that take place when you turn the wheel of your vehicle. Here are the main reasons for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
- You may encounter abnormal wear and tear on one of the seals. This would result in an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Mercedes Classe V
If you discover grinding noises on your Mercedes Classe V each time you turn the wheels, it may be connected to the hydraulic system of your vehicle that allows you to operate the entire power steering part. In this instance, the main point to check is the power steering fluid level, which if below the normal level could be a sign of a leak of the unit. In this case, remember to redo the level and check it regularly. If the trouble is persistant, go to your motor mechanic.
“A grinding noise on Mercedes Classe V each time I turn the wheels of my vehicle” can also be a consequence of premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Take into account to check their condition.
Finally, a grinding noise on Mercedes Classe V each time I turn may be connected to a tired steering pump power steering pump. The goal of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may show up between it and the belt. Take into account to check that it is working properly.
If despite these different solutions you continue to notice a grinding noise on Mercedes Classe V when turning your steering wheel, we have produced a complete content on this subject that can support you locate the origin.
I listen a grinding noise on Mercedes Classe V each time braking
If you perceive a grinding noise from the brakes of your Mercedes Classe V, it is highly possible that it will be related to brake pads at the end of their life, in fact, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead they will have to be changed as soon as possible because they will as soon as possible damage your discs.
If, despite verification, your grinding noise on Mercedes Classe V does come from your brakes but is not connected to the pads, check this content to find out the other conceivable origins of brake noises on Mercedes Classe V.
I perceive a grinding noise on Mercedes Classe V at the shock absorbers
If you are in the scenario where you discern the grinding noise on Mercedes Classe V as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply each time you change direction and the vehicle’s mass is swung from one side to the other. In this instance, there are several reasons that can explain this noise. Indeed, you will have to check some points, here they are:
at each compression.
Once you have examined all these points, you should have found the origin of your trouble, go to your auto technician to fix the faulty part. If you have not located the origin of your trouble, we suggest that you take a look at this content which discusses all possible origins of shock absorber noise on Mercedes Classe V.
I perceive a grinding noise on Mercedes Classe V at a door
If that’s not enough, don’t hesitate to read this complete content on door sounds on Mercedes Classe V.
It is conceivable, determined by the kind of of noise you note, that the hinge of your door is at the origin of these noises. If this is the case, you will have to verify it by opening your door and verifying that
