If you too have already discover a grinding noise on Mercedes Classe B 2, you must have wondering the same questions as all Mercedes Classe B 2 owners. We are rarely reassured when a grinding noise appears on our car. As we are conscious of your uncertainties and questions, we have chosen to prepare this article content in order to assist you in and ease your investigation for a answer to your trouble. To do this, first we will see what the sources of a grinding noise on Mercedes Classe B 2 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Mercedes Classe B 2 that originates from the shock absorbers and to finish from one of your doors.grinding-noise-mercedes-classe-b-2

I acknowledge a grinding noise on Mercedes Classe B 2 once I turn the wheel

First, we will take a look at the grinding noises on Mercedes Classe B 2 that occur when you turn the wheel of your car. Here are the main causes for this:

  • Hydraulic system
  • If you are subject to grinding noises on your Mercedes Classe B 2 once you turn the wheels, it may be relating to the hydraulic system of your car that allows you to operate the entire power steering part. In such a case, the main point to examine is the power steering fluid level, which if below the normal level could be an indicator of a leak of the device. In this case, keep in mind to redo the level and examine it regularly. If the trouble persists, go to your mechanic.

  • Bearings
  • “A grinding noise on Mercedes Classe B 2 once I turn the wheels of my car” can also originate from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Bear in mind to examine their state.

  • Steering pump
  • Finally, a grinding noise on Mercedes Classe B 2 once I turn may be relating to a tired steering pump power steering pump. The objective of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may occur between it and the belt. Think about to examine that it is working properly.

    If despite these different solutions you continue to hear a grinding noise on Mercedes Classe B 2 when turning your steering wheel, we have wrote a complete content page on this subject that can support you locate the origin.

    I perceive a grinding noise on Mercedes Classe B 2 once braking

    If you acknowledge a grinding noise from the brakes of your Mercedes Classe B 2, it is highly conceivable that it will be associated with brake pads at the end of their life, indeed, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and examine the wear indicator on them. If they are dead they will have to be substituted fairly quickly because they will fairly quickly damage your discs.
    If, despite check, your grinding noise on Mercedes Classe B 2 does come from your brakes but is not relating to the pads, examine this content to find out the other possible sources of brake noises on Mercedes Classe B 2.

    I acknowledge a grinding noise on Mercedes Classe B 2 at the shock absorbers

    If you are in the scenario where you find the grinding noise on Mercedes Classe B 2 as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply once you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several causes that can explain this noise. In fact, you will have to examine some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Mercedes Classe B 2

    at each compression.
    Once you have checked out all these areas, you should have found the source of your issue, go to your auto mechanic to repair the defective component. If you have not discovered the source of your trouble, we recommend that you have a look at this content which discusses all possible origins of shock absorber noise on Mercedes Classe B 2.

    I acknowledge a grinding noise on Mercedes Classe B 2 at a door

    If that’s not enough, don’t hesitate to check out this complete content on door sounds on Mercedes Classe B 2.
    It is possible, based on the type of noise you acknowledge, that the hinge of your door is at the source of these noises. If this is the case, you will have to verify it by opening your door and checking out that the grinding noise on your Mercedes Classe B 2 comes from a hinge that is too dry. To resolve this trouble, first try to grease the hinge, in most cases this is enough to solve your trouble. If that’s not enough, don’t hesitate to take a look at this complete content on door sounds on Mercedes Classe B 2.